23121
General Mach Discussion / Re: Problems,Problems, Problems, Wiring
« on: May 28, 2008, 07:15:50 PM »
Please attach your xml.
Also worth checking is that you are getting voltage out of your port, check with a voltmeter on the Dir pins and make sure they toggle when you jog back and forth. If you have a scope check the pulse on the Step pins when jogging, if not then use the voltmeter on milli volt range just to confirm there is output.
Hood
Also worth checking is that you are getting voltage out of your port, check with a voltmeter on the Dir pins and make sure they toggle when you jog back and forth. If you have a scope check the pulse on the Step pins when jogging, if not then use the voltmeter on milli volt range just to confirm there is output.
Hood