On a question about "Open Doors Inhibit" Hood replied that the answer was "System Hotkeys from Config menu and set up the Chosen OEM as 1021" why 1021 and what would happen if 1022 is used instead. My feeling is that there is a lot more to this software than most folks know.
Thanks to everyone for all the comments so far..
Dennis
That actually had nothing to do with the Inhbit input, it was just the guy wanting an extra E-Stop input and he thought it may be the way. OEM codes can be for DROs, LEDs and Buttons and is just a means of you using VB to write to a specific DRO or look at a specific LED or Operate a specific button from VB or used viar OEM triggers, they can also be used in conjunction with Brains.
I am wondering however why you are going to all this bother when a few home switches would get you back up and running accurately in a few seconds, I would certainly be much happier in myself doing it that way than trying to do an auto routine, but maybe thats just me.
The optical switches I have on my first Mill I did (Bridgeport) were tested with a glass scale DRO and the DRO returned to zero each test I did except once and that was 0.005mm the DRO read, I did 100 runs, so not bad at all
Hood