12741
General Mach Discussion / Re: tool offsets questions - G41/G42 and G43 behaviour
« on: February 15, 2011, 04:52:33 PM »
Try this to see what happens
Start Mach and home by pressing the Ref All button, your machine should move to the home switches and set machine coords zero. Now either move via MDI or jogging the position you want G54 zero to be then zero the DROs with the button. Close Mach then restart and home and then command a G0X0Y0 and see if it goes to G54 Zero position.
Hood
Start Mach and home by pressing the Ref All button, your machine should move to the home switches and set machine coords zero. Now either move via MDI or jogging the position you want G54 zero to be then zero the DROs with the button. Close Mach then restart and home and then command a G0X0Y0 and see if it goes to G54 Zero position.
Hood