10313
« on: November 03, 2011, 03:39:30 AM »
That should work perfectly if you have the G55 offset set correctly.
Easiest way would be if you could touch off something with the scribe head and make sure you are in G54 offset by typing that in MDI and pressing enter then zero the X and Y DROs. You would then type G55 in MDI and hit enter key then touch off the torch to the same thing you previously touched off the scribe at then zero the DROs again.
If that is not working for you then attach your xml and I will have a look. Also attach the fixtures.dat file which is located in the macro folder of the profile you use.
Hood