Hello Guest it is March 28, 2024, 08:22:20 AM

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - Johnny Storm

Pages: « 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 »
41
Spanish / Re: arme una mesa con dos coordenadas
« on: July 19, 2012, 05:44:34 PM »
si quieres ayuda necesitas poner mas datos, por ejemplo de que tamaño y peso es tu maquina, si usas motores a pasos o servomotores, de que torque son, que drivers y de cuentos amperes son, cuanto tiempo funcionan los motores bien antes de calentarse, etc etc

42
General Mach Discussion / Re: Feed Hold (pause) ERROR - Please Help
« on: July 15, 2012, 11:10:29 PM »
SOLVED - just change DISTANCE MODE and IJ MODE to ABSOLUTE, and then change to absolute in my CAM Software too

43
General Mach Discussion / Re: Mach V.043 feed hold still broken
« on: July 15, 2012, 09:30:10 PM »
I have the same problem with my Mach3 in my plasma table :S

44
General Mach Discussion / Feed Hold (pause) ERROR - Please Help
« on: July 15, 2012, 09:12:22 PM »
Hello, I have a plasma CNC table... the machine works fine the problem is when I use the Feed Hold and then when I hit the Cycle Start buton the machine goes crazy and moves in wrong direction.

My Mach3 is Ver. 3.043.062 and yes is full licenced

I make a video of this problem: http://www.youtube.com/watch?v=pD3PCP3r2gs

45
General Mach Discussion / Re: How can i JOG during operation ?
« on: July 07, 2012, 06:31:50 PM »
You can't jog, but you can use the THC Up/Down inputs.  Just go to Port & Pin -> Mill Option and under THC Options, elect "Allow THC control even if not in THC mode".  Now just make a remote with two buttons that activates the THC Up/Down inputs.

Thank you :)

46
Spanish / Re: Ayuda, Problema con mesa de corte
« on: July 07, 2012, 03:46:45 PM »
Se me ocurre que puede ser problema del programa que estás utilizando para generar el código G, verifica que todas las unidades estén en pulgadas. también te recomendaría que te mudaras a Mach3 en cuento tengas oportunidad, ya que de Mach2 no hay tanta información disponible

47
Spanish / Re: Ayuda, Problema con mesa de corte
« on: July 07, 2012, 03:30:19 PM »
te sugiero conectar el motor del eje x a como estaba antes, desde mach3 puedes invertir el sentido del motor sin tener que moverle a los cables del motor entra aqui:

48
SOLVED!!! the problem was I have 2 Computers: one on my house(64bits) and other in the work shop (32bits) I install Mach3 on both because in my house I have free time for make tests, screenset changes etc. etc. then I copy that changes in a USB memory and carry to the workshop... and today I tested the THC Emulated imputs in the workshop computer and the DRO it´s moves and the z axis too, im very happy and so grateful with you guys for the help, thank you all :)

49
Yes it is in plasma mode, and yes I have the full Licenced mach3 copy too, I tried Allow THC Up/Dn even if NOT Mode... but still does not move... Im very frustrated, I checked in the DIAGNOSTICS end the THC ON, UP and DOWN LED´s works fine when I hit the button for every one.. but still does not move :(

50
Ports and pins/Input Signals


THC Up
THC Down


Set them up as external buttons or emulate with the keyboard.

Russ

Thank you, I was tried that emulate with the keyboard, but the axis dont moves :S

Pages: « 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 »