Messages

11

LazyCam (Beta) / Re: drill sel holes does and drill radius holes not working

« on: December 19, 2010, 07:09:45 PM »

update im using a 1/8" end mill not 1/16"

12

LazyCam (Beta) / Re: drill sel holes does and drill radius holes not working

« on: December 19, 2010, 05:34:43 PM »

sorry guys haven't had much time for the machine lately, anyway first thing first, where is the manual you speak of i would love to have that?
as for the drilling operations have not been successful at all, this time i now have my part that connects the dust collector to the cnc machine,
so i have a 4" hole, a large pocket with a hole in the center, 2 cross dowel holes and approx. 140 1/16" holes around the perimeter that I'm going to put broom bristles
in these holes i could'nt get to drill or to offset, so i went back to cad and redrew them as a very tiny circle and deleted the actual circle, this is very time consuming. so the set up is 1/16" ed mill to do the entire operation, Ive attached the dxf file that I'm trying to drill holes in, i added a couple of 1/8" holes in the center of the part for testing the drilling operation, thanks for the help Rich

Justin

13

LazyCam (Beta) / drill sel holes does and drill radius holes not working

« on: December 05, 2010, 08:18:26 PM »

I have tried everything to get lazycam to drill 1/4" holes when the tool is alsol 1/4". im importing a dxf. file to lazy cam and has a number of differet size holes from 1/4 up to 1", the offset tool works fine for anything larger than a 1/4" hole. I know that it works ive had it work before but now nothing, i'm getting good with lazycam just cant get these two very important buttons to work please help