Messages

21

General Mach Discussion / How do you change Programs in MACH 3 File Menu

« on: October 25, 2011, 12:38:16 PM »

Ok this has probably been answered a million times ,but here goes.  When opening Mach 3 and scrolling over "File" a list of programs appear,  (Sheetcam,V Carve Pro,Lazycam, etc.)  How does one ADD or REMOVE the programs in this list?     Thanks   Rich

22

Mach Screens / A redo of scott's Back In Black screen

« on: March 19, 2011, 11:29:25 PM »

Here's a little something I've been working on for a while now after some self taught graphic design. I like this screen and gerry's aqua screen alot but found this one to be easier to work with since I was able to have the RealDraw Pro files.  Just making to suit my taste and style. Thanks scott for this GREAT screen.

23

Mach Screens / Re: Bitmap LED's not working right

« on: March 19, 2011, 05:38:50 PM »

Thank you for your valuable time. That makes perfect sense.    Thanks Again Richard

24

Mach Screens / Re: Bitmap LED's not working right

« on: March 19, 2011, 03:18:17 PM »

OK Great.  DUH!! I remember now, anyway here it is . Thanks Again Richard

25

Mach Screens / Re: Bitmap LED's not working right

« on: March 19, 2011, 02:00:47 PM »

Ok See if this is what your talking about. Try it if you can please. Now for some reason when I press insert image it show's "bmp" .  Am I missing something in the reply box .thanks    Richard

26

Mach Screens / Bitmap LED's not working right

« on: March 18, 2011, 10:56:24 PM »

Gerry how do you get your bitmap led's to work flawlessly, when going from one state to another. I'm using REALDRAW PRO , how do you make them where they DON'T jump from side to side as if they were different size's. I've  seen benny's video's and still they don't work right. any help and instruction's would be great! Thanks        Richard

27

General Mach Discussion / Re: Y Axis racking when sent to "Home"

« on: December 23, 2010, 06:45:49 PM »

Thank you very much!!! That was it.

28

General Mach Discussion / Y Axis racking when sent to "Home"

« on: December 20, 2010, 08:10:28 PM »

I have 2 steppers on the y axis gantry which is R&P one on each side, they are the same brand, bought at the same time. Well the problem is when I "Home" the Y axis, one motor runs faster than the other. The odd part is when I jog or say "Go to zero" then they are fine. Any Suggestions? Thanks   Richard

29

Mach Screens / Re: My First Screen

« on: December 06, 2010, 09:12:55 PM »

What oem code would you have to use for a vacuum table button or a dust extractor button? Or does those have to be done with scripts?

30

Mach Screens / Re: My First Screen

« on: December 06, 2010, 09:02:54 PM »

Gerry that works great I'm sitting here playing with MachScreen and trying to learn it. I'm liking it more and more. Thanks for all your help.