871
Mach4 General Discussion / Re: Mach 4 UC100 HDBB2 Spindle Speed setup (last piece to the puzzle)
« on: August 27, 2017, 01:21:37 PM »
The UC100 can output a PWM signal, and the HDBB can convert it to a 0-5V signal. You setup the PWM in the UC100 plugin.
If you need 0-10V, you'll need a breakout board or speed control to convert PWM to 0-10V.
If you need 0-10V, you'll need a breakout board or speed control to convert PWM to 0-10V.