5721
General Mach Discussion / Re: How to launch Mach3 and open automatically a file
« on: January 30, 2009, 09:46:08 PM »
In Notepad, type the path to the g-code file, like this:
Loadfile("C:\CNC-parts-Files\Button1.TAP")
and save as a macro file, like M777.m1s
In General Config, put M777 in the initialization string.
When mach3 starts, and you click reset, the file will load.
Thanks to Scott for the Loadfile info I saved a while back.
Loadfile("C:\CNC-parts-Files\Button1.TAP")
and save as a macro file, like M777.m1s
In General Config, put M777 in the initialization string.
When mach3 starts, and you click reset, the file will load.
Thanks to Scott for the Loadfile info I saved a while back.