3771
G-Code, CAD, and CAM discussions / Re: Meshcam Help!
« on: February 11, 2012, 11:25:22 PM »
Try reducing the tolerance setting in MeshCAM. I've never had anything take more than 5 minutes or so.
But yes, you can copy files from one PC to the Mach3 machine. If you use a SmoothStepper, you can run Mach3 on the 64bit machine as well.
But yes, you can copy files from one PC to the Mach3 machine. If you use a SmoothStepper, you can run Mach3 on the 64bit machine as well.