4761
General Mach Discussion / Re: DRO anomoly with g68
« on: December 04, 2011, 11:14:15 AM »
Switching back and forth with the G69 is not needed in this case. You are stilll in the same plane you could also add to the rotation as a inc move.
But switching back and forth with subs is triggering the quirk Inside one of the subs. It did NOT do this when testing the same routine without subs
I ended up testing your routine as is but just removed all the G69s except for the last one placed just before the M30. That way the machine is rotated Back to normal as the program ends. It worked here that way.
The original code will still cause the quirk.
You may want to turn this over to Andrew/ Brian for fixing.
"I " agree it SHOULD NOT DO THIS, but you are preaching to the choir (;-)
(;-) TP
But switching back and forth with subs is triggering the quirk Inside one of the subs. It did NOT do this when testing the same routine without subs
I ended up testing your routine as is but just removed all the G69s except for the last one placed just before the M30. That way the machine is rotated Back to normal as the program ends. It worked here that way.
The original code will still cause the quirk.
You may want to turn this over to Andrew/ Brian for fixing.
"I " agree it SHOULD NOT DO THIS, but you are preaching to the choir (;-)
(;-) TP