3371
General Mach Discussion / Re: Thinking of a new wrapper function for MAch3.
« on: December 17, 2012, 05:21:03 AM »
The parameter swap takes teh original A axis steps per and removes the Deg per math back down to steps per REV then applies the Circumference back to it and then you have Steps per UNIT for that diameter of the stock.
The version you tested had that wrong so the latest version shoulod get teh steps per correct based on teh original settings of your machine.
NOW the Velocity and Acceleration I just pluged in some numbers in the button code. I can bring that out to screen so you can set it for your application.
Let me know if there is anything you want or need for it. OR have at it yourself (;-) The code is all there, NOT commented yet (;-) but there.
(;-) TP
The version you tested had that wrong so the latest version shoulod get teh steps per correct based on teh original settings of your machine.
NOW the Velocity and Acceleration I just pluged in some numbers in the button code. I can bring that out to screen so you can set it for your application.
Let me know if there is anything you want or need for it. OR have at it yourself (;-) The code is all there, NOT commented yet (;-) but there.
(;-) TP