1
Mach3 and G-Rex / Arrow key worked now they don't
« on: February 14, 2011, 08:08:14 PM »
Hello all,
I'm very new to the CNC world so for give my ignorance. I set Mach 3 up as the tutorials show. I loaded my first "G" Code and turned the Plasma on and made a part. After doing this the Arrow keys no longer work to jog the X and Y axis I can use the MPD buttons to move the axis but not the arrow keys. Any Ideas what the heck I screwed up. One other issue I am having is that Mach3 seems to forget the soft limits and over run. Could some of this be my motor drivers.
Any help would be appreciated.
Thanks
I'm very new to the CNC world so for give my ignorance. I set Mach 3 up as the tutorials show. I loaded my first "G" Code and turned the Plasma on and made a part. After doing this the Arrow keys no longer work to jog the X and Y axis I can use the MPD buttons to move the axis but not the arrow keys. Any Ideas what the heck I screwed up. One other issue I am having is that Mach3 seems to forget the soft limits and over run. Could some of this be my motor drivers.
Any help would be appreciated.
Thanks