Messages

71

General Mach Discussion / Re: gecko540 problem under mach3

« on: October 09, 2011, 10:47:53 AM »

how it should be set?

72

General Mach Discussion / Re: gecko540 problem under mach3

« on: October 09, 2011, 10:45:39 AM »

i have  16mm pinch 5mm ballscrew

73

General Mach Discussion / Re: gecko540 problem under mach3

« on: October 09, 2011, 10:44:01 AM »

motor  tunning 1

74

General Mach Discussion / Re: gecko540 problem under mach3

« on: October 09, 2011, 10:11:45 AM »

that is  file

75

General Mach Discussion / gecko540 problem under mach3

« on: October 08, 2011, 08:52:12 PM »

I can not believe that  you can set 100% perfect gecko540 with mach3 , I am working on this more then 4 months I have a big cnc machine sx3 This problem began  when I changed it to cnc. at small distances 40mm x 40mm 30mm hole in the middle , the  machine  cut  me  Y axis 40mm X axis 40.22mm inside  hile  is prefekt 30mm.
at a distance 140mm x 416mm the machine is  cuting 140.27 Yaxis  and 416.32 X  axis  I checked a dozen times my backlash , on Y axis is 0.01mm 0.0004" on
X axis  0.016mm 0.0006" in a machine that weighs about 250 kg seems to be ok, This was not so easy to get this result but my whole machine is converted, My machine has THK Linear and, therefore, this backlash has improved by up to 0.07mm I do not know what more to change? in setting mach 3 to remove the problem hell me please

sorry for my english, I trying to write as best I can

76

General Mach Discussion / Re: mach3 ssetup

« on: September 17, 2011, 07:31:06 PM »

i fix the  problem  thanks  hood  for  help  is work  perect  if i  cut 70mm x 40  hole  20mm  is ok perfect size  if i cut 40 x 30  hole 1  perfect   if i cut 340mm  x 140 hole  50mm  smole proble  it is 340.01  that is ok

77

General Mach Discussion / Re: mach3 ssetup

« on: September 17, 2011, 07:19:21 PM »

i have  ste  to 400  and I lined up in a mach 3, but it's improved

78

General Mach Discussion / Re: mach3 ssetup

« on: September 17, 2011, 12:26:02 PM »

Who will help me set this MACH3

79

General Mach Discussion / Re: mach3 ssetup

« on: September 17, 2011, 12:20:38 PM »

the parts  is  40mm x 40mm  inside hole 30mm
 after i fix the   big problem   onli is problem  with one X axis
.
 parts cut out dimensions 40mm Y axis  hole 30mm  and X axis 40.20mm only the  X  AXIS  is problem

80

General Mach Discussion / Re: mach3 ssetup

« on: September 17, 2011, 12:15:27 PM »

the problem was in the Velocity and Accel. I fixed it but it is still a small problem