Messages

61

General Mach Discussion / Re: gecko540 problem under mach3

« on: October 10, 2011, 12:12:06 AM »

my setup

62

General Mach Discussion / Re: gecko540 problem under mach3

« on: October 09, 2011, 11:45:53 PM »

komar1970,

This problem is not only with this machine, it was with every my machine

You have numerous machines and computers. Can't tell if you ever realy resolved  any of the posted problems you are having. Some of the threads seem like they never come to a conclusion. I am not sure which machine or computer you are using at any given moment. One would think that after ONE YEAR
you would know how to set the steps per unit, be able to confirm the steps, set backlash ( backlash dosen't go away or get better), and understand if you deviate from the calculated how that relates to axis travel. Sorry if this sounds harsh ....but can't help fix the door hinges when the door is swinging  back and forth.

So keep to one machine, computer, xml file used for the setup, the type of screws  ( are they rolled / precision ground / how supported / etc.).

Maybe I am missing something,

RICH

 I'm in shock. I never wrote the I do not know how to set the machine , I have a problem with prcision  of cutting  parts , people from MACH3 can not hellp me ,  gecko will not help, because hi says that has no idea how to set the gecko540 with MACH3 and refer you to the MACH3

63

General Mach Discussion / Re: gecko540 problem under mach3

« on: October 09, 2011, 11:24:17 PM »

Are you THAT confident that the problem can't possibly be in your machine, that you're willing to believe all those thousands of satisfied customers are basically idiots?

 write to you so. if you were trying for 3 years with 4 komutery , change a few machines. and on each machine problem ?! you say why did not you call to somebody? I called the gecko . Gecko at all times says that they have no idea how to set the gecko540 with  MACH3 . I called to MACH3 support! This guy from MACH3 logged in to my computer's  verifiability all , and nothing helped , He said only the MACH3 is well set , but I have been with the problem unsolved . I'm sorry that I offended someone, I had not thinks of that at sorry men

64

General Mach Discussion / Re: gecko540 problem under mach3

« on: October 09, 2011, 10:44:18 PM »

ok i will add video

65

General Mach Discussion / Re: gecko540 problem under mach3

« on: October 09, 2011, 02:22:59 PM »

I'll check again today backlash on the axes

66

General Mach Discussion / Re: gecko540 problem under mach3

« on: October 09, 2011, 02:20:27 PM »

I think I checked everything already? volts is ok, 3.5 for each 2,4,6,8 i dont no  wath  to  do more

67

General Mach Discussion / Re: gecko540 problem under mach3

« on: October 09, 2011, 02:15:09 PM »

and maybe these people have never checked if they are cut very precisely parts

68

General Mach Discussion / Re: gecko540 problem under mach3

« on: October 09, 2011, 01:54:20 PM »

and that  is  the  problem because they say the do not know anything about MACH3 and setup.

I know I have to change the driver and see what will be  after . hood I request of you if you know some who jet driver ok? hood I have a question for you? if you know some driver that will be the best

69

General Mach Discussion / Re: gecko540 problem under mach3

« on: October 09, 2011, 12:27:09 PM »

Mach3 folder and double click


it is  ok    is straight

I checked it in different ways. I set in Sherline mode  ,also cuts the longer parts , so I'm sure , I am not able to cut out such pasrt as I have in the project  . maybe with a different cnc  driver I mean gecko 203v and c11  . This problem is not only with this machine, it was with every my machine. I have a question for people who have a driver540 if ever  have set gecko540 perfect whit  mach 3

70

General Mach Discussion / Re: gecko540 problem under mach3

« on: October 09, 2011, 11:19:19 AM »

I have zero backlash coupling. so tell me how to set the E-STOP  . In  MACH3 I have opportunities to set the step pulse , and also there is a problem if I set the distance of 1 cm  10mm , machine goes to 10mm distance so I have to enter in mach3  how far the machine is moved,  the  digital indicator shows me 10mm .it means that it is ok. So why in the distance of 70mm   digital indicator does not show  the machine defeated this distance. I just set in the 1 cm and very possible I should in set at 5cm or 10 cm thanks  for  felp