Messages

31

General Mach Discussion / Re: mach3 connect 2 Z axis

« on: October 19, 2011, 11:39:10 AM »

also thought so myself , but I saw what plasma is doing how it comes out . I thought it better to spend a little more and do  on the other side secend  axis

32

General Mach Discussion / Re: mach3 connect 2 Z axis

« on: October 19, 2011, 10:19:18 AM »

ok I see that there is no other option, it means I have to disconnect from one Z axis  motor cable , and connect the other motor. I am building a cnc router with plasma ,on one Z axis  will be plasma on the second Z axis spindle.
and that is why I wanted to work 2 Z axis separately.
does this mean? after working with plasma, machine will have to go to zero, rewarded the cables and start the spindle axis?

33

General Mach Discussion / Re: mach3 connect 2 Z axis

« on: October 19, 2011, 08:23:17 AM »

I want to check once more g540, so I decided to build this cnc router with 2 Z axis. the only problem I have is if I will be able connect the 2 Z axis separately
I mean 1 to Z axis and the second to A or to B  i dont know

34

General Mach Discussion / Re: mach3 connect 2 Z axis

« on: October 19, 2011, 07:27:17 AM »

not, it seems that it is not possible I have no more power, to annoy myself I have submitted myself, with gecko g540 I worked already 4 years , and never the driver worked well.

 I know that someone will say (This guy just does not know how to set the cnc machine!) This is not true! , For 4 years there is no possibility, so you did not learn what's come on in this.
Is there any problem, but I do not know what , and the worst part is that no one know what the problem is

35

General Mach Discussion / mach3 connect 2 Z axis

« on: October 18, 2011, 07:44:12 PM »

I just started to build cnc router with 2 Z axis , Please tell me how I connect the 2 Z axis to work separately. My  cnc driver  is g540  

36

General Mach Discussion / Re: gecko540 problem under mach3

« on: October 12, 2011, 04:47:17 PM »

ok of course I will try to see what will be. Thank you for your help

37

General Mach Discussion / Re: gecko540 problem under mach3

« on: October 12, 2011, 03:15:02 PM »

more and more I'm convinced! gecko 540 can not be set  perfect!  I called today to MACH3, I said all , that guy had nothing more to say

38

General Mach Discussion / Re: gecko540 problem under mach3

« on: October 12, 2011, 01:24:03 PM »

I've done it already and it is the same, practically nothing has changed  with  the  2  axis  Y and X the  same  error  0.31mm   on distance 76.2 the machine  only moves 75.89mm

39

General Mach Discussion / Re: gecko540 problem under mach3

« on: October 12, 2011, 12:33:48 PM »

hi rich. I do not understand anything of this , I checked today on the set  step 400m/mi  my Machine on Y and X axis , machine can not overcome on two axes at a distance 76.2mm 3 " loses on 2 axes  0.31mm ,my question.?  if  I cut the same parts Y-axis cut me  ok  hole ok  bath the  X axis is  long over 0.25 i. After all, on two axes does not overcome the distance 76.2mm, and is the same difference 0.31mm.I'm already stupid, I do not know what I think

40

General Mach Discussion / Re: gecko540 problem under mach3

« on: October 11, 2011, 08:20:39 PM »

whot  it is  i cent  find nothing  pc 5.0 v pp