Messages

11

General Mach Discussion / Re: i have a problem with rhino cam 2.0 5 axis.

« on: April 26, 2012, 09:58:34 PM »

These are the questions  that microsoft.com asked me . My machine is with Trunnion Table and has 2 routers If you know the answer please help me



1. 5 axis machine configuration (Head-Head / Table-Head/ Table-Table) --- we know this : Table-Table is your configuration.
2. Information on Primary and Secondary axis.
(For example: A head-head configuration, the Primary axis is about Z axis and the Rotation axis code is represented by the letter "C' and secondary axis is about Y axis, rotation axis code , is represented by the letter "B")
3. G & M code specifications from the controller manual
4. Information on canned cycles for drilling, tapping, boring operations, (G81 - G89)
5. Arc output formats for Circular interpolations (G02/G03),
6. Start and End Block information
7. Tool Change definition  ( I dont have)
8. A sample g-code that has 5th axis output.

12

General Mach Discussion / Re: i have a problem with rhino cam 2.0 5 axis.

« on: April 24, 2012, 10:28:40 PM »

i have a question if anybody can write me a test g-code for 5 axis mill  table - table

thank you for your reply

13

General Mach Discussion / i have a problem with rhino cam 2.0 5 axis.

« on: April 24, 2012, 08:45:46 PM »

 I baught from mec soft corporation rhino cam 4 axis. Now i want to buy 5 axis rhino cam pro and their asking me about comment for 5 axis because they have to make a special post processor. I dont know what kind of g code for 5 axis their asking me about if i dont have such a program to make this g code. could somebody explain to me what their inquiries are.

14

General Mach Discussion / Re: Two stepper motors for one axis

« on: January 26, 2012, 06:57:11 AM »

thanks  vere  much

15

General Mach Discussion / Re: Two stepper motors for one axis

« on: January 26, 2012, 06:32:02 AM »

slave them in Mach
can you explain more how to do it in MACH3

16

General Mach Discussion / Two stepper motors for one axis

« on: January 26, 2012, 05:52:46 AM »

When you build a cnc router   with 2 ballscrew , Two stepper motors  for one Y axis
how do you wire the two stepper motors that drive the Y axis

 (cnc driver  gecko g540)

17

General Mach Discussion / Re: mach3 problem

« on: January 17, 2012, 09:18:22 AM »

thanks 

18

General Mach Discussion / Re: mach3 problem

« on: January 16, 2012, 04:56:50 PM »

file

19

General Mach Discussion / Re: mach3 problem

« on: January 16, 2012, 04:24:32 PM »

  g-code

20

General Mach Discussion / Re: mach3 problem

« on: January 16, 2012, 04:08:24 PM »

This problem can spoil my part? what I cutting out