Guest
Show Posts
21
Finished Plugins for Download / Re: A new Huanyang VFD plugin
« on: July 11, 2013, 01:54:57 PM »Yes it should. Make sure you change your setting in the VFD itself.
PD001 should be 2 (Sets your computer as the source of run commands) was
PD002 should be 2 (Sets your computer as the source of frequency) was
PD003 should be 60 (Sets your main frequency to 60hz) was @ 0
PD004 should be 60 (Sets your initial starting frequency to 60hz) was
PD141 should be your motor's voltage (on your motor's nameplate - prob 220 or 240) was
PD142 should be your motor's current (on your motor's nameplate - probably around 6 amps or so) was @11.0
PD143 should be number of poles for your motor (Yours should be 2 pole - based on your RPM at 60hz) was @ 4 nothing on the motor
PD144 should be your motor's RPM at 50hz (For you, it's 2875) was
Also, later once you have it working, if you set PD015,PD017,PD019, and PD021 to "0.1" and PD118 to 1 you'll get a mighty nice slow down speed when you tell the VFD to stop
thanks for the tips. it ran good witht hese old settings for long time though?
maybe i am misssing something big in my xml?
