Messages

21

Works in progress / Re: 4 axis screens for 800x600 display

« on: March 10, 2010, 07:51:36 AM »

Dear Sir

I upload some photos of the control box of my CNC.

High Tech Key

22

Works in progress / Re: 4 axis screens for 800x600 display

« on: March 09, 2010, 09:24:32 PM »

Dear Zafar

Yeath... I replaced axis drive motors. These motor are AC servo motors from china. I will post some photos of my control boxes later. I use joystick to control the axis movement and some functions. It is really work and great. I connected this controller with Mach3 using KeyGrabber.

High Tech Key

23

General Mach Discussion / Computer hanging with Mach3

« on: March 08, 2010, 10:31:41 AM »

Dear Sir

My computer often hangs when I use with Mach3 CNC controller. My computer specification are:

Processor - Pentium 4 2.66 GHz
Memory - DDR 512 MB (333)
HDD - 80GB
Graphic - MX400 (64 MB)

My machine is 3 axis Milling. I use 60kHz kernal speed. I decrease kernal speed to 45kHz, but I face the same problem. There is no spindle speed control (only relays on/off). What should I do? Do I need to change my PC? I hope someone can give me some advice.

Best Regards,
High Texh Key

24

Works in progress / Re: 4 axis screens for 800x600 display

« on: March 08, 2010, 09:55:29 AM »

Dear Sir

Here is next two....

High Tech Key

25

Works in progress / Re: 4 axis screens for 800x600 display

« on: March 08, 2010, 09:49:10 AM »

Dear Sir

Thank for your reply. I will wait your 1024x768 screen set. I upload the photos of my machine with your screen set. The older CNC control is Anilam 3000M and I retrofit with Mach3. I need some modification with this system.

High Tech Key

26

Works in progress / Re: 4 axis screens for 800x600 display

« on: March 07, 2010, 07:48:09 AM »

Dear Sir

Thank for your new screen set. But my monitor cannot support 1280x1024 resolution. My monitor screen size is 15 inches and only support 1024x768 resolution maximum. So, I cannot use your new screen set.
I cannot find x/2, y/2 z/2 buttons in your new screen. This button is very useful to offset the center of workpiece. But this screen set is really great.

High Tech Key

27

Share Your GCode / NC file for 4 axes machine

« on: March 02, 2010, 08:04:42 AM »

Dear Bro

I want to know which CAM software can generate 4 axes tool path for Mach3. I use Master CAM 9 for 3 axes machining. Can I use Master CAM for 4 axes maching?  Now I try to improve 4th axis rotary table in my Milling machine. So, I want to know the 4axes tool path with rotary table (A) axis.

I also want to get 4 axes tool path NC files that someone did. I hope somebody advice me.

Best regards,
High Tech Key

28

Works in progress / Re: 4 axis screens for 800x600 display

« on: March 02, 2010, 07:43:06 AM »

Dear Zafar

Yeath.... It is a little difference between Auto Screen Enlarge enable and disable. I noticed this difference yesterday. So, I also want to 1024x768 screen set that you modify. Now, I am using this 800x600 screen set using Auto Enlarge screen set because I need some wizard in my work.

I will upload my machine photo with your screen set later. Because I don't have any photo now. I will take pictures and upload later.

Thank you so much. Let me know if your 1024x768 screen set finish.

Best Regards,
High Tech Key

29

Works in progress / Re: 4 axis screens for 800x600 display

« on: March 01, 2010, 08:51:03 AM »

Dear Sir

Thank you for your advice. I will be trying for font display.

Now I can use Load Wizard and Last Wizard. I modify your screen set with Screen Tweak. I set my screen resolution to 800x600. But I did not uncheck Auto Screen Enlarge. So, my wirzard screen is auto resize to 800x600 resolution. I am OK with this setting now. I want some comment about this.

High Tech Key

30

Works in progress / Re: 4 axis screens for 800x600 display

« on: February 28, 2010, 09:24:25 AM »

Thank zafarsalam

I had already tested your screen set. It is really great. I saw the Simulate Program Button in your screen set.

But I have font error with your screen set. I install your Digital7-Mono Font. But I can't see this font in my DRO and see other font. And the font size is a little big than DRO size. I upload this photo and please advice me how can I solve this problem.

Another problem is that I cannot use Load Wizard and Last Wizard. I think you did not set this function in this button. Please upload if you finish for this function.

High Tech Key