Messages

311

General Mach Discussion / Re: Pulse Frequency

« on: June 02, 2009, 03:23:20 AM »

well thanks for your time in helping me dude.. appreciated

no time right now to chase this one but have to cut a super dense part tomorrow night.. i think if its gonna freak it would be then.

312

General Mach Discussion / Re: Pulse Frequency

« on: June 02, 2009, 03:05:52 AM »

well.. tie me up and tickle me with a dwarf...

did not change anything when i got home tonight.. only changes made were to my motor tuning to up the x,y,z to 1200mm/min and kernel to 35000. did not change that other setting either.

"A" seems fine now.. could not find a path that stalled it on a 180 flip. will continue testing, will also take it back to 24000 to see if its the kernel speed that made difference but everything in me says its not that.

will probably only happen to me when i have a paying job on the mill..!!  typically!

If that hapens again i will document it. I know other people with exactly same mill and setting have the same issue so im reasonably sure its not just a figment of my imagination

313

Show"N"Tell ( What you have made with your CNC machine.) / Re: Engraved in Stainless

« on: June 02, 2009, 02:30:26 AM »

mwaaaaaahahahahahaahaha dude.. beauty is in the eye of the beholder!

my mirror says I am "DA Man!!"

314

Tangent Corner / Re: David Laser Scanner

« on: June 02, 2009, 12:23:25 AM »

just ordered some better lasers.. hope it improves!

315

Show"N"Tell ( What you have made with your CNC machine.) / Re: My first attempts at laser engraving.

« on: June 02, 2009, 12:11:24 AM »

ok.. ordered  1 x 200mw laser and 5 small focusable line lasers to better "aid" in my experiments...


wife gave go ahead..

316

Show"N"Tell ( What you have made with your CNC machine.) / Re: Engraved in Stainless

« on: June 02, 2009, 12:10:41 AM »

great job man!! milling in metal is still only a dream for me...

317

General Mach Discussion / Re: Pulse Frequency

« on: June 01, 2009, 10:34:01 PM »

ok cool will test that tonight

thanks for help.. like i said before not a major issue.. resolves by turning off toolpath display but would like to get it all running if i can

318

General Mach Discussion / Re: Pulse Frequency

« on: June 01, 2009, 10:02:24 PM »

ok got news from a fellow user.. apparently if i switch A low active on all my lettering  on jewellery will come out reversed/mirrored, think he means will turn in wrong direction for milling. ??

319

General Mach Discussion / Re: Pulse Frequency

« on: June 01, 2009, 09:18:38 PM »

not sure why that one is different.. i dont poke around in there usually. those are defaults from my mach install i think. will try changing that and give it a whirl.

far as i know all the steppers are the same make and brand as well as the controllers for them so you are right.. should be the same i guess?

320

General Mach Discussion / Re: Pulse Frequency

« on: June 01, 2009, 08:39:24 PM »

ok my wife sent my xml to me..

man.. the value of a wife that can find your mach xml for you is under rated..

here it is..

this is my backup xml at 24000hz


edit (added set file that xml calls)