1
LazyTurn / Re: LazyTurn
« on: July 20, 2009, 10:22:29 PM »
Hi Rich,
Here are a couple DXFs from ACAD2002 saved as R12. The cigarTop should have end diameters of 0.480 & 0.580. The cigarBottom should have end diameters of 0.530 & 0.462. I ran LT using the diamond35 bit and 0.002 depth cuts. What I got as far as GCode was 0.531 & 0.626 for the top; 0.582 & 0.512 for the bottom. Where's that extra 0.050 coming from?
These may still be more complex than ideal. Used a spline to get the shape.
Thank you, Joe
Here are a couple DXFs from ACAD2002 saved as R12. The cigarTop should have end diameters of 0.480 & 0.580. The cigarBottom should have end diameters of 0.530 & 0.462. I ran LT using the diamond35 bit and 0.002 depth cuts. What I got as far as GCode was 0.531 & 0.626 for the top; 0.582 & 0.512 for the bottom. Where's that extra 0.050 coming from?
These may still be more complex than ideal. Used a spline to get the shape.
Thank you, Joe