Hello Guest it is March 28, 2024, 07:44:50 PM

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - bladerunner

Pages: « 1 2 3 4 5 6 »
21
Tangent Corner / MY NEW MAN CAVE!
« on: March 10, 2012, 07:15:46 PM »
Just moved back to the Uk...
had to build my new cane from scratch ..that in itself is actually a blessing more than a pain...as I now get to do it the way I would like it..so here goes a few shots...
also got some more work done on BLADERUNNER as it started out working so hard it never had a chance of being completed..now its almost there....

The cave...
40 square meters devided into 3rds...2 3rds are the mancave with all the toys for boys....and 1 3rd is recording studio...all double skinned and wall/floor/roof insulated....

check it out!

started here

 3 days later

4days

5 days

8 days painted and all done..

some snow...


and then some nice new workbenches made from the left over timber with new countertops...


and my Bladerunner and mill in situe!




have unpacked all my boxes and now its impossible to move in ther euntill it finds its little spot in the shop!

cheers
haydn

22
heheh talk about waking up a dead thread...
Ive just moved back to the uk so been a long old trek..

to answer the last question asked..

all carbon fiber and black g10

cheers

haydn....

23
Excellent work Bladerunner. Did you design the individual parts yourself ?

Hey Sam, most guys at least manage the duration of the fuel tank before making the scrap.  ;D

Tweakie.

howdee Folks..

yes I did ...its been a long project in the making..my 800 size heli holds the "unnoficial speed record at 257kms".....the 1000 size heli..thats by blade size folks 1000mm for interest sake...

the 1000 is my latest design in a series starting with the MINIVOLT 500 ..Volt 700 Wolf 700 MEGAVOLT 800 WEREWOLF 800 and now the AVA 1000....the Volt 700 designs where blatently ripped of by a famous company and sold to the masses...I could not stop them from doing it..but the "700e for them"was a total flop for them as they didnt actually copy the "SACRED" numbers needed to make the Volt and Wolf what it is in the Air....My helis are found here...
www.full-pitch.net
still working on the site
sorry daone files are not freeware as the helis are in production ..have 200 in stock if you would like one....the 1000 costs 5000 usa dollars to produce and its the only one of its kind on the plannet....
scorpion 5035 410
130 main gear
10 pinion
V-stabi
Bls servos allround
built for 24cell (2 x12 cell 6000 mah..thats 12000 mah)
6.8kgs RTF
930 main blades..built for 1000mm blades
TT made from arrow shafts

got 7 min from 6000,s with 1200 headspeed 35% throttle curve (dangerous for the mosfets in the speed) hense the 130 maingear upgrade (thanx to Rave ENV!)
now still have 7 min from 6000 with 1400 with throttle curve at 50% with 113 main and 11 pinion..so tataly the wrong gear ratio but its retrofitted and will test fly soon

thanx

Haydn

24
Hi Guys well its been about a year since i started with Mach3 and CNC and this is my latest achievment..its a 12 cell 48v 12hp 2 meter mainrotor disk Heli....80% of the heli is manufatured on my home built and designed Router using Mach3 as the controller...

here are some feartures of my design..

the blade grips..

with head button ...12 hearts hehehehe

the size of things....



tail drive gearbox

and some vids of the test flights
http://www.youtube.com/watch?v=g1UmYXXwheo
http://www.youtube.com/watch?v=xvRgErv5A1I

25
Howdee..Noim not the pilot, its Warrick our local Instructor and I needed to make the vid for everybody...
The helidesign is my own...Its taken a Nitro helicopters running bits....and ive completely redisigned the way the heli is integrated with its power plant....The electric motor develops 5.6 hp over the nitros 3.8...It runs on 44.4 volt 5000,s 25/35c discharge rate and that 4.3min flight used up 55% of the packs fuel adnd was at full throttle with a headspeed of 2250 rpm ..the motor ran at 59 celcius the speed controller at 45 the batterys at 34...
took me 4 weeks to design and build at 14 hours a day...

So to answer your question....The FRAME SET is what Ive built....servo holders,engine mount,baseplate,

Soon will be making the interestingbits..Swashplate grips

cheers

Haydn

26
Show"N"Tell ( What you have made with your CNC machine.) / Helicopter
« on: February 09, 2010, 11:55:18 AM »
http://www.youtube.com/watch?v=PygGoZ_ugxs

Maiden Voyage of helicopter made on BLADERUNNER

enjoy!

27
Thanx...

The running Gear is all from a "NITRO" helicopter..this is my REMIX into an electric 700 with the frame set and engine and baseplate mounts...

YEA BABY!

28
BladeRunners Little Child......

This is The main Reason Bladerunner Lives!
And Now has Flying OffSpring!....YEA BABY!







Cheers

Haydn

29
Show"N"Tell ( Your Machines) / Re: SWARF "0" MAT Son Of Bladerunner
« on: November 23, 2009, 12:02:29 AM »
Thanx Gents!
Ive also had a hand in the design on another machine.....We plan on making it available to the world market as soon as we have given it a godd proper kick in the Nuts and Bolts to find its short fallings and after that hopefully it will be ready!..here is a vid of it doing a F3F glider tail as a test run....Paul constructed the machine With the help of BladeRunner and Myself.Paul basically built my DREAM MACHINE as the overhead gantry design i feel is very stable and strong...
http://www.youtube.com/watch?v=xZWIWajh9Ec

here is the vid of first cut of the machines day!

http://www.youtube.com/watch?v=vOaRKJ1Sl4I

this is also an original design and not a rip off of anybodys design at all

Watch this SPACE!

yeeehaaaa!


30
Show"N"Tell ( Your Machines) / SWARF "0" MAT Son Of Bladerunner
« on: November 21, 2009, 11:16:07 AM »
A new machine is Born.....son of bladerunner built by Skot and myself (Haydn) Wil post more pics....the machines home will be here...

http://hacklabperth.org/wiki/index.php/CNC_Machine

YEA BABY!

May The Swarf Be with YOU!

Pages: « 1 2 3 4 5 6 »