Messages

91

General Mach Discussion / Re: master cam to mach3 turn

« on: June 28, 2010, 06:49:48 AM »

you bet hood
but i still have a problem mastercam is posting in radius with the mach3B post and when i change the post to fanuc it is ok posing in diameter but fanuc instead or i,j they use r so in mach3 they will come out circles
i need a mach3 post for mastercam that post in diameter
can some one help me !!!!!

92

General Mach Discussion / master cam to mach3 turn

« on: June 27, 2010, 04:20:08 AM »

dear guys
i am trying to work with the mastercam and posting in mach3 turn and i have a problem when mastercam generate the gcode G02,G03 in mach3 turn they are coming up circles i tryed to change the i,k to absolute but the problem keep coming up the difference is when i change I,K from absolute to incremental the circles come big or small any one is useing mastercam to mach3 turn so can help me !!!!!!!!!

93

General Mach Discussion / Re: lazyturn problem

« on: June 25, 2010, 01:05:50 PM »

hi rich i down load the lazy turn from the mach3 website  do i need to download it from some where else cause i still have the same problem

94

General Mach Discussion / Re: lazyturn problem

« on: June 24, 2010, 02:12:29 PM »

dear rich
even if i select a tool for rough and it generate g code for that tool in diameter and after chosing the same tool but in finishing the g code is generate in radius instead of diameter

95

General Mach Discussion / lazyturn problem

« on: June 24, 2010, 12:53:25 AM »

dear guys
i down load the lazyturn and i was playing with it i just notice that when i make the roughing tool in diameter mode they come ok but when i make the fine tool they come in radius instead of diameter
what i am doing wrong ?

96

General Mach Discussion / 2nd parallel port

« on: June 23, 2010, 08:47:13 AM »

hi guys
i just brouth a pci parallel port  and i instail it but when i whent to find the adress in the device manager there is no resources tap so i cannot see the adress
is there an other way where you can see the adress ?
the driver of this card is sun-4008t

97

General Mach Discussion / waterjet screen

« on: June 22, 2010, 01:45:50 PM »

hi guys
i allready have a waterjet running and in the near future i will need an other one so i was thinking that maybe some of you already did this i need a screen for a waterjet cutting machine i am ready to pay for it cause the next machine i want it to run by mach

98

General Mach Discussion / re setting milling

« on: January 02, 2010, 08:46:50 AM »

hi guys
i have a mill with an atc and all the hardware is in place and i managed to start the machine and now as the machine is getting more complicated i am confused with the brains so i was thinking maybe there is some one want to come to Malta and help me set the machine and make everything working as suppose do if he is from Europe would be grate

99

General Mach Discussion / Re: 16 atc via modbus

« on: December 21, 2009, 02:08:49 AM »

i made the tool changer but i still have an other problem which is when i reboot mach 3 the tool changer go to position 1 , i dont know why this is happins but the current tool still read the old tool number then when i make an other tool change it works fine  i made also a dro which i can see the oem dro 2000 and as i reboot first it is 0 after i press reset it go to 1 and toolchange go to position 1
can some one help

100

General Mach Discussion / cnc bending roller

« on: November 19, 2009, 01:40:32 PM »

did any one made a cnc bending roller with mach3 ?