Messages

11

VB and the development of wizards / button for activate/deactivate output 7

« on: February 24, 2013, 10:53:13 AM »

hi

I'm trying to get a button working in mach3 to activate output 7 when pushed and deactivate when pushed again. output 7 port 10 pin 7 on the pokey.
Pin no 7. is set to output and IO to output7.

The pokeys is a 57E with the new plugin for mach3

hope some can help me with a VB for this.

/Mike

12

General Mach Discussion / Re: homing routine

« on: September 09, 2009, 02:58:01 PM »

okay it is working now, but I had to change G0 to G54. hope not it is a problem for me later. Please let me know if you think this is a bad idea.

Thanks again

13

General Mach Discussion / Re: homing routine

« on: September 09, 2009, 02:20:07 PM »

Thanks it's almost works But I think it needs a dro reset also when it is finish Ref all home before it jumps to M990. now it is moving to the last work coordinates zero and simply add 1.0 every time I ref all home.

Mike

14

General Mach Discussion / Re: homing routine

« on: September 09, 2009, 09:21:01 AM »

Hi poppabear

I want the second one .. I need to zero machine coordinates (ref all home) X and Y, then move to a new position and then Zero Work coordinat X and Y. (Fix point every time)
What I dont want is to hit GoTo Zero after a Ref All Home

Mike

15

General Mach Discussion / Re: homing routine

« on: September 09, 2009, 08:42:27 AM »

okay, problem no. 2 is solved. I have not montert switch on z yet and forgot to remove it from the script.
Still need some code for problem no.1

Mike

16

General Mach Discussion / homing routine

« on: September 09, 2009, 08:18:21 AM »

Hi

I have 2 problems with the ref allhome function

1. I want that for X and Y after have activated the home switches run to a ref point and reset to zero ?


2. after I've made a ref allhome mach3 locks and must be reset to continue. this is only in program run (ALT-1) if I do it in diagnostics (ALT-7) one at a time I can get move on.

hope any one can help me with my problems.

Thanks

Mike