Messages

91

LazyTurn / Re: LazyTurn

« on: November 28, 2008, 04:54:53 PM »

Heya, Art,
Is there any way to keep all the zip files in one updated file for D/L. I 'm tring to get all the zips together,but am having problems with getting errors with some that are asking for a dll LMsomething such that keeps asking. Could you Do an updated file,so that everything up to now is in one place for D/L, and be easier to update after. Just a suggestion, I'm having problems as usual :-O Thanks,   Hank S.

92

Newfangled Solutions Mach3 Wizards / Re: NFW is not keeping the settings changes

« on: November 11, 2008, 10:25:42 AM »

Hi Ron,
I took your advise and looked at the documents pdf on Mach,and got some Good References for the program. Whom ever wrote this DOC. should be Commended For aGreat Job,Along with the Time spent for writing such a Useful DOC. Many Many Thanks. Back to the problem at hand,I did reload Mach and I did discover that something else is Not Playing well with mach,or the other Machines, or files from the other Machines . I got it to SAVE, and the NFW and Mach wizards do now in fact Work! I'm gunna keep an eye pealed, for I know I did not change anything, Just shut down as usual from a previous run like always,and something went HayWire! Why would that in fact keep the NFW and Mach wizards from making changes. This has me puzzled,as said, never in the last year or so that this Ver.of Mach,did I find a problem. Program runs now and wizards work as should,I did nothing but reinstall Mach, over the one that Ihad been having problems with,and all is WELL. Thanks for your Time and Effort and Support, Till I have a problem again,Let's just wait and see, Should be a Long Time,Hopefully.   Thanks,   Hank S.

93

Newfangled Solutions Mach3 Wizards / Re: NFW is not keeping the settings changes

« on: November 10, 2008, 06:29:18 PM »

Hi,
So what does that mean. I clicked on the shortcut on the desktop for mach to open, but didn't open it and clicked on properties, thenit has 3 buttons one is general, one is shortcut,and one is capabilities. The tab in general is Mach3Mill, no spaces shortcut,C:\Mach3\Mach3.exe /p Mach3Mill. Capabilities is nothing.I changed in the general tab to  MachX2. and it works, close the tab out and close Mach alltogether, start up again, and the 3 are the same, except the wizards do not work. It still says MachX2, Do over again start MachX2,and open program,get ready to run,press wizards,wizards open, cannot do any changes..... Close MachX2, click on MachX2 on desktop,highlight,to properties,and is still General MachX2 shortcut the same, open MachX2,and wizards still do not work, Back to desktop,click properties,same MachX2 change to MachMill close, open Machmill start program, Wizards work. till next shutdown, then have to rename it again to MachX2 to get it to work again. Every other time i shut down Mach,Ihave to rename the general with a different MachX2 or machMill to get the wizards to work. Hope this Helps in Explaining this problem. Thanks,   Hank S.

94

Newfangled Solutions Mach3 Wizards / NFW is not keeping the settings changes

« on: November 10, 2008, 05:35:11 PM »

Hello Ron, I Presume.
I've been having problems with NFW and the Mach Wizards,as they won't except the changes when tool or distance or # of holes are pressed. I had this problem yesterday,and tinkered around,and after a while found that I had to rename the Machine in the properties dialog box to get this to stick. See, I have Mach configured to 3 machines,and have had no problem running them all,One At A Time,and got the same problem today as well. Running Mach Ver.031 and loaded the newest Ver13~16 now ,and still the same problem. Renaming the General machine folder that Mach assigns itself ,works for a while,then resorts to changing,thus no saving of the settings in the Wizards when changed. I hope I have made this as readable as possible,and just don't know what to do to keep this from happening again. AS said; I never had this problem before,and cannot think of anything I did to provoke this kind of action. Maybe You Can Help.  Thanks,  Hank S.

95

Competitions / Re: ******Guess and win a G100 Grex******

« on: May 22, 2007, 12:32:45 PM »

I'll Say, 2,880,696
Hank S.

96

LazyCam (Beta) / Re: Here is the new GUI :) Lcam rev ->The Next One

« on: April 17, 2007, 09:47:38 AM »

Look's Good, Maybe you could toggle on and off a grid, and put in an X0.0 Y0.0, the same for Lathe, Could use a tool save for diameter of tools used and stored. Make it for a screen to display the whole screen, as LC.now,  is TOO big for the 1028x768 that I'm using now, Have to exit bottom initial pane to get the pocket button to revial the button. Otherwise Look's Good! Hank S.

97

LazyCam (Beta) / Re: LazyCam

« on: April 05, 2007, 01:36:38 PM »

That was Quick, and Painless. Thanks,  Hank S.

98

LazyCam (Beta) / LazyCam

« on: April 05, 2007, 12:30:49 PM »

I'd like to know what I need to get Pro LazyCam to do Pocketing and Islands,of fonts. I have a valid license, and my name is on he about pulldown in Mach. Do I have to purchase another something,? to get the Pro LazyCam to work. The Pro LazyCam button is there, but blocked out,or non functional. Any Help would be great. Maybe I missed something,and tried to find some info.  Hank S.