Messages

1

Promote and discuss your product / Re: GibbsCAM/MasterCAM/PowerMill Training Materials and Online Videos!

« on: December 23, 2023, 01:56:31 PM »

GibbsCAM/MasterCAM/PowerMill Training Materials and Online Videos:
http://jeffcnc.webs.com/

http://jeffcnc.weebly.com/

2

Promote and discuss your product / Re: GibbsCAM/MasterCAM/PowerMill Training Materials and Online Videos!

« on: December 23, 2023, 01:55:55 PM »

https://jeffcnc.weebly.com/cnc-programming/customized-good-post-and-machinesim

3

Promote and discuss your product / GibbsCAM/MasterCAM/PowerMill Training Materials and Online Videos!

« on: November 21, 2010, 06:46:01 PM »

GibbsCAM/MasterCAM/PowerMill Training Materials and Online Videos:
http://jeffcnc.webs.com/

4

Promote and discuss your product / Good tool for CNC programming!

« on: April 26, 2009, 04:51:12 PM »

NC Rotate V2009 is a good tool for CNC programming! It’s very easy for you changing your NC program with 90 DEG,-90 DEG or 180 DEG for parts stop right side. You don’t need modify your program manually every time, waste time and easy made mistake. Use NC Rotate V2009, save time and save money!

tailed introduction about NC Rotate V2009 software
http://jeffcnc.spaces.live.com/blog/cns!39D065444B8350DA!337.entry

5

G-Code, CAD, and CAM discussions / Good Post, Good Program

« on: February 15, 2009, 01:07:03 PM »

We made some Gibbs posts for customer; they said all posts are wonderful!

They use it without change anything, not only have beautiful format, and have many special skills.

For example:

Sub program number always matching tool number (Post can remember tools used before)

Post can remember and count M00 whatever you use any times.

You can post only one or more sub program for every operation.

You can have Tool corner radius, tool and operation Comment and communication information.

New Tools, Same tool, Program stop, CS change…Everything, No problem!

 We can made Post customization, my aim is you don’t need change anything after Post

If you interested please don’t hesitate contact me: jeffliu2@hotmail.com

Thanks

JEFF CNC CENTER

http://jeffcnc.spaces.live.com/

Enclosure: Example post for general 3-axis machine

 

 

6

G-Code, CAD, and CAM discussions / Good Gibbs Post!

« on: February 13, 2009, 06:28:58 PM »

Before, I wrote topic "Good Post, Good Program" about I made some special Gibbs posts for customer:

Sub program number always matching tool number (Post can remember tools used before, I believe nobody can do it! )
Post can remember and count M00 whatever you use any times. (Post can put M00(1)...M00(n) ).
You can post only one or more sub program for every operation......

Anyway, mybe you don't understand or don't like it, but my customer satisfied 100%. Thant's enough!

If you like it, or need some special Gibbs Post, just contact me, I guarantee you 100% satisfied too (Good Post and Good Price)!

I just come here sometimes, please give me Email: jeffliu2@hotmail.com

Thanx,  JEFF

http://jeffcnc.spaces.live.com/