Messages

251

PoKeys / Re: Wrong Direction Sending G-Gode, Jogging and homing works fine

« on: January 24, 2015, 02:46:32 AM »

Hi, Lukas

I would suggest you to upgrade to 3.1.47 firmware first (the latest available).

Regarding the axis inversion - use the Motor Outputs settings (in Ports & Pins dialog) to toggle the Dir LowActive fields.  Although port and pins fields have no meaning for PoKeys devices, 'Dir LowActive' field still does have.

Regards,
Matevž

252

PoKeys / Re: Pokeys57E and ChargePump

« on: January 15, 2015, 11:01:10 AM »

Enable the 'Pulse engine' option in Peripherals > Failsafe settings in PoKeys application set set the failsafe timeout.

253

PoKeys / Re: PoExtBusOC, invert output ?

« on: January 15, 2015, 10:57:00 AM »

This feature is planned to be released in 3.1.47 update.

254

PoKeys / Re: Getting LEDs to illuminate

« on: January 09, 2015, 11:30:53 AM »

Hi

Did you try and test the LED using PoKeys software? Do you have the latest Mach3 and Mach3 PoKeys plugin?

255

PoKeys / Re: Pokeys57E motion problem

« on: January 08, 2015, 03:07:44 AM »

Do you have any firewall software installed?

256

PoKeys / Re: Pokeys57E motion problem

« on: January 05, 2015, 01:21:59 PM »

Did you try doing a dry run (without the drivers attached)? Is PoKeys connected to a network or are you using a direct connection with your PC?
We executed more than 10 consecutive runs of the same file now and there were no issues.

257

PoKeys / Re: Pokeys57E motion problem

« on: January 04, 2015, 01:35:35 PM »

What speeds have you configured in Mach3 motor configuration?

258

PoKeys / Re: Pokeys57E motion problem

« on: January 04, 2015, 06:46:56 AM »

Is there any other application accessing the device at the same time?

259

PoKeys / Re: Pokeys57E motion problem

« on: January 03, 2015, 02:27:06 AM »

How do you have your network configured? Open PoKeys status window (there is a button for IO status window in plugin settings) and observe the progress bar below - does it stay green?

260

PoKeys / Re: Negative value in feed override using an encoder

« on: November 25, 2014, 03:12:05 PM »

This will be fixed in the plugin in next release.