Hello Guest it is March 28, 2024, 06:57:02 AM

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Topics - 4z7

Pages: 1
1
SmoothStepper USB / Problem with SS driver 2.08
« on: March 11, 2011, 05:40:36 PM »
I have been using SS for a couple of years now. I am generally satisfied with SS performance and I don't want to appear critical of SS. I prepared the following and sent to support@warp9td.com a few days ago but never received back any acknowledgement.   I assume SS  support,  just like Mach support is forum based at this forum, so I decided to post here.  Please note that this condition was only tested on Win7 64bit


Condition:0   Machv042.36 & ss15 & FTDI driver 2.06 , Win7x64 - Operates normal (starting condition)   

 After update Mach to 3.043.022 Mach hung with ss15 and I believe SS driver was 2.06.  I updated SSdriver to 2.08  and plugin to v17 but Mach still hung  as reported in condition1, so I removed SS and connected it to a desktop machine.

Condition1:    Mach3.043.22 , ss17 or ss15 , FTDI2.08 will not load and Mach hangs.   Mach window is grayed out and mouse cursor is hour glass when on top.  Task  Manager won't end program but I can do a normal shutdown.  SS LED heartbeat is solid

When I first connected SS to the desktop, it was running Mach3.043.28 which is a current development version.  I installed the driver and plugin ss17. Mach hung condition1.   Installed Mach3.043.22 but Mach still hung.  Installed Mach3.042.36 and Mach loaded ss17 plugin and I discovered condition 2.  I loaded ss15 and condition 0 normal.  Note here that  I think I was still using FTDI2.08 and  that I got Mach3.042.36 and ss17 or ss15 to load.  BUT I am not sure.  

The following can happen with USB devices.  Plugin in to USBportA and the device  driver will load for the last driver plugged into USB portA.  Likewise for USBportB, etc.  So, if SS is plugged into USBPortA and is unrecognized (i.e. it has never been plugged into USBportA) you can install a new driver say FTDI2.08 or update driver to 2.08.  Plug SS into USBportB and it IS recognized ( i.e. it has been before plugged into USBportB) and windows will load the last driver used for the device like FTDI2.06.  So just because you updated the FTDI driver on one USB port  doesn't necessarily mean that in any other USB port the driver will always be the latest FTDI driver.  That is why if you plug in SS to a USB port that it has never been plugged into before it is unrecognized and you are asked to install a driver.


Condition:2    Mach v042.36 & ss17 Plugin will load.  I use my own joystick plugin and when jogging at 100% of max
or maybe commanding 1.05* Max Velocity ( analog +- of joystick)  SS will throw an error and halt mach "Err reported by SS. Flag register 81420000".  I thought it was my plugin, so I removed it.  With axis MaxVelocity at 50ipm I MDI commanded "g1x10F99" and motion started and moved maybe 33% of commanded and then threw the same error.  During any move, the axis velocity DRO is not very steady reading 48 49 46,etc.  Sometimes the DRO  will flash a velocity of like 200 or 500 or 5000 just before producing the err and a couple of times the error isn't  produced and axis will take off like go to 1000 within a couple of seconds.   I cannot repeat  the error with ss15. The same commanded move produces a  steady 48.7 +- .2  vel DRO and steady jogging by joystick.

Thinking that I had got Mach042.36, ss15  and FTDI2.08 to operate properly on the desktop I went to install SS back to the machine

After re-installing SS to the machine, which had Mach3.043.22 , ss17,and 2.08 ssdriver(i think); Mach started up correctly which previously had hanged as condition1.  I tested for the error condition 2 without the servos actually active so no motion was actually happening.  SS threw the same error in condition 2 so I decided to change the plugin back to v15. After doing so the Mach hung condition 1 no matter  what  version Mach or plugin.  I decided to pull the machine pc and connect to the internet.  After all, on the desktop I had a successful condition  and the only difference between the desktop and the machine operating system was Windows update hadn't been run on the machine's pc in maybe 1 year.


After 50 updates and win7 sp1 update, Mach would still hang and all my testing had left 10 different profiles none of which would work with ss. Another occurrence was::  with v15 plugin in the plugin folder, but mach started on PP, then enabled in Configure Plugins, and restart, the plugin would still be disabled on the next start.  Regardless when I'd create a new profile with ss15 and tried to load it,  Mach would hang.

I have no idea why I did not try to roll back the FTDI driver yesterday when this problem began after updating to Mach3.043.22.  Because Mach hung loading ss I assumed that ss had to be updated. After a day and a half of frustration, I rolled back the FTDI driver to v2.06.  which works  with Mach3.043.22 and ss15. Mach3.043.22  will boot with ss17 and ftdi2.06 but throws error condition 1.

Obviously there is an error between the FTDI2.08 driver and both SS plugins version 15 and 17. So in summary:

1.  SmoothStepperDriver2.08.02 which is FTDI2.08.02 driver does not work with Win7 64bit and Mach any version or plugin any version.
2.  SmothStepperDriver2.06  will load   any Mach version  or plugin .with Win7x 64
3.  SSPlugin_v17bd throws error described in Condition 2.
4.  SmothStepperDriver2.06 , Mach3.043.22, SSPlugin_Beta2_v015ogx2.ddl is reliable with Win7x64.

It should also be noted that the current version FTDI driver is 2.08.12 and that comments are "Interim bug fix release" so obviously there are bugs in 2.08.02

I hope this can help others that have reported Mach hang with a grayed out screen.
Kurt

2
One on one phone support. / Phone Support Request
« on: August 27, 2010, 07:22:19 PM »
I would like to get phone support on a plugin project and would gladly pay for an answer as I've already spent many hours (days) on this last hurdle.  I have requested advice in the forum  with details here: http://www.machsupport.com/forum/index.php/topic,15354.msg105982.html#msg105982

My email address is kurt@uhlerinc.com and if I understand correctly you will email me with a phone number and time when I may call an expert.
Thanks
Kurt

3
SmoothStepper USB / Smoothstepper and Joystick
« on: August 18, 2009, 08:52:51 PM »
I'm trying to get a USB joystick to work with Smoothstepper using SS.dll version 015ogb on a mill.  I've tried the lockdown and  .43 development versions of MACH  but with the same results.   Using the SS plugin and the joystick plugin no XY jogging  is commanded to MACH.  If I remove the SS plugin and default to the PP driver,  the joystick does command motion to MACH  (no motion actually occurs since nothing is wired to the PP). 

I can still use the Suttle & Shuttle.dll  jogging  with the Smoothstepper, but I'm tired of the 1 wheel, 3 button axis jogging of the shuttle.  Eventually I move the wrong axis and damage the workpiece or tool or loose  a reference.

Does anybody have a Microsoft compatible joystick using joystick.dll working with SS?

Kurt

4
Brains Development / Brain termination equivalent to
« on: July 20, 2009, 06:32:59 PM »
I have "Ready" signals wired to MACH Inputs from 4 servos.  I can't wire all the ready inputs to just the MACH estop input and also I want MACH to indicate what device is not "ready".  If any device faults or becomes not "ready" I want Mach to react just like it received an external estop.

Enable1 is wired to all the motor controllers which allow starting and stop the motors as fast as possible (braking) if disabled.  An estop switch and relay with aux contacts also disable/ stop the motors wired directly to the controllers.  An e-stop aux. contact is also wired to the one and only MACH E-Stop input.

A simple BRAIN with the 4 servo "ready" inputs "OR" terminated to ENABLE1 will stop or disable all the servos but doesn't disable MACH which continues motion output.  I've tried to terminate the brain to LEDs, BUTTONS, everything having to do with 'ESTOP" but nothing seems to work. 

What termination will stop all motion and flush the motion queue?  This seems like such basic fuctionality that I must be missing  something.  Thanks.


Kurt

5
SmoothStepper USB / Device Monitor Screen and Quadrature output
« on: March 16, 2009, 02:42:14 PM »
I'm converting a 3 axis mill from stepper to servo motors using SS and have the following questions.

1.  The Device Monitoring Screen has display box for 5 encoders.  Are these motor feedback encoders or MPG's?  Where would you connect five encoders to SS and what function would SS do with the information?  Does SS provide  S/D velocity or position corrections during coordinated axis motion?  Besides motor feedback for spindle speed and Z axis position on Terminal block 3 used for threading, are there any advantages  for X and Y position feedback to SS?

2.  My servo drives accept differential step and direction or differential quadrature (A+-,B+-) input.  The drives will work with single ended S/D (not recommended by the drive mfg.) which is how they are currently running.  The SS config has option for quadrature drive output on all axis.  Would this be single ended output?  Is differential output possible in S/D or quadrature?

3.  Can someone explain what AXIS DIAG- Diffs and Tlts for X,Y,Z are in the Device Monitoring Screen?

4.  Can someone explain what Probe Reg for X,Y,Z ,A are in the Device Monitoring Screen?

Hood,
Thanks in advance for sharing your knowledge on this forum.  I very much appreciate your contributions.

6
G-Code, CAD, and CAM discussions / G31 Parameters to improve probe accuracy
« on: December 10, 2008, 08:05:57 PM »
I'm trying to find more information on G31 Straight Probe Command.  What I specifically want to accomplish is to improve the accuracy of my probe in X,Y.  The Mach user guide mentions that parameters can be entered to setup the "effective radii" of the probe tip, but doesn't say which parameters or how to enter a value.   

My plan is to table mount a known accurate shape, then probe it to calculate and set the X+-,Y+- compensation parameters. 

If someone could direct me to a complete documentation on G31 Code, I'd appreciate it.  Also I'd like to know if G-Code with parameters like G31 is specific to Mach3 or universal.  Although the Mach3 Mill guide has a very good programming reference, does anyone have a recommendation for G-Code reference?

Thanks,
Kurt

Pages: 1