Hello Guest it is March 28, 2024, 03:13:03 PM

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - Graham Waterworth

1671
Are the motors red or yellow caps, what is the control, 6,11, 18M ?

Graham.

1672
G-Code, CAD, and CAM discussions / Re: Denford Orac Lathe
« on: March 10, 2008, 03:35:08 PM »
Hi Bill,

sorry to say the Orac is a lathe, I don't think your code V-Carving is any use to them.

Graham.

1673
Option #3, correct the mechanics of the machine.

Graham.
 

1674
Tangent Corner / Re: R8 Tool Change
« on: March 05, 2008, 12:19:30 PM »

1675
Tangent Corner / Re: R8 Tool Change
« on: March 05, 2008, 09:50:28 AM »

1676
Is all the single phase electrics coming from the transformer or from the wall socket?

Take a single phase from the converter and use it to drive the other electronics.

The wood frame did not allow the phases to cross, metal will.  That could be your problem.

Graham.

1677
General Mach Discussion / Re: its gonna be one of those days.
« on: March 04, 2008, 03:26:16 PM »
Not just a pretty face, or is that not a pretty face.  ;D

Graham.

1678
General Mach Discussion / Re: Feed Rate
« on: March 04, 2008, 01:56:46 PM »
In your program enter F120.  this will double the feed to 120/units per minute

Graham.

1679
General Mach Discussion / Re: its gonna be one of those days.
« on: March 04, 2008, 12:41:50 PM »
Add the red bits and it works, I don't know what has changed in Mach .037 but I will have a word with Brian about it.

Graham.

%
G90 G01 X0.0 Y0.0 F1000
M98 P1 L1
M98 P2 L1
M30

O1
X0.0 Y0.0
X1.0 Y0.0
X1.0 Y1.0
X0.0 Y1.0
X0.0 Y0.0
M99

O2
X2.0 Y0.0
X3.0 Y0.0
X3.0 Y1.0
X2.0 Y1.0
X2.0 Y0.0
M99
%

1680
General Mach Discussion / Re: G95 lathe problem
« on: March 04, 2008, 12:30:48 PM »
Have a look at this post too :-

http://www.machsupport.com/forum/index.php/topic,5494.0.html

Graham.