Messages

641

LazyTurn / Re: LazyTurn

« on: November 10, 2008, 03:13:14 AM »

Hi, Rich, Art & All

The LIGHT went Bright, I was so busy Snapping shapes on a Grid and Posting, I didn't pay attention to the Grid Scale Setting's.

Haven't gone back to check, So if there Huge, Sorry for the HUGE Drawings.!!!

I'm Plenty Excited About LazyTurn & LazyCam for Sure.

Thanks, Chip

642

LazyTurn / Re: LazyTurn

« on: November 10, 2008, 12:52:59 AM »

Hi, Art

How will Inside cuts be handled.

Thanks, Chip

643

LazyTurn / Re: LazyTurn

« on: November 09, 2008, 07:16:32 PM »

Hi, Art, Rich

Got the 3 ball to load after load/save in Rino dxf, Then reversing the left end line and extending it helped Rough path on the left ball.

DXF formats differ So much, It's really sad,. Hears the dxf and 2 pic's, Still some Open GL stack overflows, But no major crashes. Is there a way to halt/stop or abort path generation when I Enter a to small Depth Per Pass Value. ?

Thanks, Chip

644

LazyTurn / Re: LazyTurn

« on: November 09, 2008, 12:05:11 AM »

Hi, Art

That chess King posted so nice, There are allot of shapes to deal with, BC looks like this, Got any BC Powder's.

Thanks, Chip

645

LazyTurn / Re: LazyTurn

« on: November 08, 2008, 09:31:00 PM »

Hi, RICH

The More the Better, Hears a pic in Mach and Txt post done in BobCad v21 of what should be cutting, It's a inside cut starting at X0 Z0 moving Z- X+ outwards with a pre-drilled center hole in the stock.

So the top pic in my previous post is pretty close except for the arc missing.

Thanks, Chip

646

LazyTurn / Re: LazyTurn

« on: November 08, 2008, 07:55:06 PM »

Hi, Art

While I've had a few Open-GL errors, L-Turn hasn't crashed and seems Robust.

Hear are 2 Pic's & 2 DXF's that Arc.'s are missed on rough tool path, There for a Axial Compressor Inlet In/Ex-Ducser profile.

Thanks, Chip

647

General Mach Discussion / Re: Z AXIS KNEE

« on: November 08, 2008, 12:13:23 PM »

Hi, Ed V

Mine are Stepper Motor, Haven't used them in quite some time, No pic.'s, Yes the air assist is adjustable, Up to 1,000 lbs part wt.

Sorry no real speed reports, I do like the independent Z quill feature.

The servo powered one's went back to Z axis spindle and I'd think there faster in Z axis.

Chip

648

General Mach Discussion / Re: Z AXIS KNEE

« on: November 07, 2008, 11:43:17 PM »

Hi, Ed V

Search for Bridge Port Series 2 CNC, I have 2 of them, There Air Assist Ball Screw Knee.

Chip

649

LazyTurn / Re: LazyTurn

« on: November 07, 2008, 11:13:52 PM »

Hi, Jim

Do a search in Windows Explorer for LaxyTurn, See Pic.

Hope this Helps, Chip

650

LazyTurn / Re: LazyTurn

« on: November 07, 2008, 09:32:23 PM »

Hi, Art

Now this is looking Pretty Lazy, Pic.'s of Graham's King.

Thanks, Chip