Messages

551

LazyTurn / Re: LazyTurn

« on: December 25, 2008, 12:42:31 PM »

Hi, Art

Some files are loading now, But just in outline only, No graphics or tool showing and thy will post code.

Other files generate a 406 error, All though one did show full graphics, But 406 error trying to generate Rough view.

Thanks, Chip

552

LazyTurn / Re: LazyTurn

« on: December 24, 2008, 10:45:33 PM »

Hi, Art

Thank Art and HO HO HO, Merry Christmas to All.

Edit: Still err 214 hear, Well regrouping the king master dose load part way without a crash.

Chip

553

LazyTurn / Re: LazyTurn

« on: December 24, 2008, 11:52:30 AM »

Hi, Art

Thanks for the update, Hears 2 Pic's of the error I get now.

As you now most of us are lost with this Stuff, Hears a pdf and zip of some info that may apply to this, It talks about Bubble Buffering and such.

Thanks, Chip

554

LazyTurn / Re: LazyTurn

« on: December 24, 2008, 12:35:11 AM »

Hi, Guy's

Spoke to Soon Both new Ver's are ToDo-ing hear, Even tryed them on a different computer, The error indicates opengl32.dll error.

Program opens up, On dxf load TODO and crash is as far as it goes.

Chip

555

G-Code, CAD, and CAM discussions / Re: Connecting POINTS

« on: December 23, 2008, 05:19:07 PM »

Hi, RC

Probably not what you want, But LazyCam will post this dxf w\drill routine that can be edited slightly to cut the shape out, See below.

RinoCad has a feature called Poly line through Point's that try's to do It (Older Version hear).

Chip

556

LazyTurn / Re: LazyTurn

« on: December 23, 2008, 04:05:24 PM »

Hi, Guy's

Working hear now with latest ver, Thanks, Art, Wound up re-installing LC\update also, Earlier one today still TODO error.

Back to work hear.

Thanks, Chip

557

LazyTurn / Re: LazyTurn

« on: December 23, 2008, 02:30:15 PM »

Hi, Art

Getting a TODO error on ALL files I try to Open with latest ver. hear, So Far.

Chip

558

General Mach Discussion / Re: Code hangs and z drils to China

« on: December 22, 2008, 12:36:58 AM »

Hi, Citade

The G4 setting is in Mach3 Config, General Configuration, See Pic below.

Thanks, Chip

559

General Mach Discussion / Re: Code hangs and z drils to China

« on: December 21, 2008, 12:32:50 AM »

Hi, Citadel

Post the file.

Chip

560

General Mach Discussion / Re: Lazycam Turn

« on: December 20, 2008, 03:40:15 PM »

Hi, Mike

I'm using both, LazyTurn for the Rough and LazyCam Turn for the Finish profile, When finish profiles are implemented in LazyTurn there wont be a need to use both.

As I stated earlier: " LazyCam Turn will for the most part generate a finish pass, If you just load your dxf and use the Optomize function and Post the Gcode file, Then you can Paste the 2 files together and cut your Part".

We are all hopping that in the near future that both versions will merge together and graduate past the Bata versions Status.

Chip