2046
« on: May 29, 2006, 11:23:26 PM »
Hi, Art and Brian
Lazycam layer control, nice from Layer Control on off generate's g-code for layer that's on. Shading of layer's in pulldown nice, is it intended to not turn off layer's when g=code is generated.
Lot's of progress really nice.
Hear are some item's to look at though.
File: Test55.dxf located in Yahoo Files Lazycam Folder and at the top of this post.
Load Options, Keep Layer as is (Checked).
Click on Box to move leadin then click on Bull's eye Origin to move leadin, Errors to error report Lazycam shuts down.
If I zoom in some times I can move origin or leadin/start but not offtin and if I reset origin with Layer/Object Property Drawing Origin enter new value, Liadin can be moved then the origin can be moved with min xy button or origin value change but not with mouse click and move.
Click on Triangle set to outside leadin right side of triangle leadin is inside also on outside leadin rt.side is inside. There backward's
Posting Option: unchecked Spindle speed, It gen's spindle g-code
Posting Option: unchecked Z plasma, No display of Cut for first cut due to No G01 generated.
Posting Option: unchecked Spindle and Z plasma, No display of Cut for first cut due to No G01 generated.
No direction arrow's for Cir's
One other item if you load a DXF with lines and curves continues from start to end it generates leadin points at each change even though it's a continues cut, is there a way to remove them.
Thank's Chip