Hello Guest it is September 21, 2023, 11:11:24 AM

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Messages - Chip

LazyCam (Beta) / Re: Cut order
« on: July 06, 2006, 02:35:56 PM »
Hi Psad

If you change the leadin/start point's, move them around  on your objects, you can change the order to some degree.

By moving the inside cut's away from the outside cut's this has allowed  some additional order to force the outside to be cut last.

It will be nice to allow setting cut order though.

Hope this helps, Chip

LazyCam (Beta) / Re: LC 2.54
« on: June 27, 2006, 03:44:16 PM »
Hi, Psid

Your item 1,  When you load a file in LazyCam you can  post your Gcode, leave LC open, minimize it, Run your Gcode in Mach3, if you need to change it minimize Mach3,  maximize LC make change's repost with a different name.

You always have your original DXF files.

LasyCam dose not load Gcode files.

Hope this helps, Chip

LazyCam (Beta) / Re: lazycam
« on: June 26, 2006, 11:34:03 PM »
Hi, Brian

The code changes you made work great.

Thank's Chip

Hi, Art, Brian and All

Dissregard the G02 not working in ver.1.90.052 it's working now, who now's why.

Thank's Chip

LazyCam (Beta) / LazyCam Ver.2.53 or 2.54 in latest Mach3D1.90.052 ?
« on: June 25, 2006, 02:32:55 AM »
Hi, Art,  Brian and All

First thing's first Mach3V.040 and LazyCam Ver 2.53 are working nice on our IR Waterjet cutter we aren't using to many advanced

feature's yet, but it's working  nice.

Thank's Art, Brian and All for the hard work.

Downloaded Ver.D1.90.052 today.

Line N18 G02  won't load in Mach3D1.90.052.

It loads just fine in Mach3D1.90.050.

Lines  N13, N20, N29  G04's should before the M5's,  I think in Plasma Mode.

N1 (File test55 )
N2 (Sunday, June 25, 2006)
N3 G90 G80 G40 G91.1
N4 G0 X1.0000 Y0.0000 Z0.0000
N5 M3
N6 G4 P0.1000
N7 G1  F10.00
N8    X0.0000  F100.00
N9    Y1.0040
N10    X1.0000
N11    Y0.0000
N12 M5
N13 G4 P0.1000
N14 G0 X2.5020 Y2.0080
N15 M3 S0
N16 G4 P0.1000
N17 G1  F10.00
N18 G2 I-0.5020 J0.0000 F50.25
N19 M5
N20 G4 P0.1000
N21 G0 X2.0000 Y0.0000
N22 M3 S0
N23 G4 P0.1000
N24 G1  F10.00
N25    X4.0000 Y2.0080  F100.00
N26    Y0.0000
N27    X2.0000
N28 M5
N29 G4 P0.1000
N30 G0 Z0.0000
N31 M5 M9
N32 X0.0 Y0.0
N33 G40 G80M30

Thank's Chip

LazyCam (Beta) / Re: trouble with 2.53
« on: June 22, 2006, 11:24:36 AM »

Hear is the error file that would be sent see Att.

Thank's Chip

LazyCam (Beta) / Re: trouble with 2.53
« on: June 22, 2006, 09:50:34 AM »
Hi, Brian

This is the error I Get.

Unhandled exception at 0x5ed8d913 in LazyCam.exe: 0xC0000005: Access violation reading location 0x021b2320.

Line of code  5ED8D913  fsub        dword ptr [esi+8]

Thank's Chip 

LazyCam (Beta) / Re: trouble with 2.53
« on: June 17, 2006, 12:50:35 AM »
Hi, Psad

You can Zoom in on the 0,0 marker and mouse click the object and sometimes it will not error out.

Must be a bug.

Hope this help's Chip

LazyCam (Beta) / Re: LazyCam won't load
« on: June 03, 2006, 04:41:47 PM »
Hi, Brian

Thank's for fast reply, The old LC generated line N9 that way seem's more consistent.

I now its redundent, but displays G02 more typical structure.

Have you got a LC D Ver./ Bata you could send me.

Thank's Chip

General Mach Discussion / Re: Losing Position
« on: June 03, 2006, 02:44:48 PM »
Hi, Mike

You mentioned that, " I did have the screensaver on (Dont know why)" this has cause problems for me in the past, Turn it off.

If it goes to sleep the wake up can cause lost steps.

Thank's, Chip