Messages

1211

General Mach Discussion / Re: How do I zero Machine Coords for "A-axis"?

« on: January 04, 2008, 07:26:39 PM »

Hi, Halk

Have you tried, DoButton( 25 ) on a separate Button to ref A axis.

Added it to my "Home All" Button

DoButton( 24 )
DoButton( 23 )
DoButton( 22 )
DoButton( 25 )

Got to go for now be back soon with some more.

Thanks, Chip

1212

LazyCam (Beta) / Re: How do I order chains?

« on: January 04, 2008, 05:05:04 PM »

Hi, Spinnetti

Looked at your dxf and LC PRO, There doesn't seem to be a way to move Entity at this time.

This is what I did, Edited each half on a different layer in Cad, Then saved them by turning one layer off at a time, Saved them to left and right.

Load one at a time and saved as LCAM files, Hear thy are.

LC just isn't up to doing much at this time 

Thanks, Chip

Hears the DXF also

1213

General Mach Discussion / Re: movement stops but dro says its still going

« on: January 04, 2008, 12:15:23 AM »

Hi, Dave

If the DRO is still moving the A axis should be moving.

Need to think on this one a little. Try a "g01 A100000 F25" move, maybe your velocity is set to fast.

Thanks, Chip

1214

LazyCam (Beta) / Re: How do I order chains?

« on: January 04, 2008, 12:03:53 AM »

Hi, Spinnetti

Looked at your dxf and LC PRO, There doesn't seem to be a way to move Entity at this time.

I think the best approach would to draw each half on a different layer, Then you should be able to move the starting points for the chains.

Top of screen "Save *.LCAM"

Thanks, Chip

1215

LazyCam (Beta) / Re: Layer-Chains out of sync

« on: January 03, 2008, 11:58:25 PM »

Hi, Bertho

O-well Bata version.

Thanks, Chip

1216

General Mach Discussion / Re: Using external inputs and OEM codes

« on: January 03, 2008, 10:08:34 PM »

Hi, Ryan

I think you need to set an oem trigger up, In ports and pin's, Inputs, To a OEM trigger # (1-15) for your switch.

Then include that triggers oem code in your script, something sorta like this.

If IsInputActive( OEM Trig # ) Then
   DeActivateSignal( OEM code )
Else
   ActivateSignal( OEM code )
End If

Well it's a Start, Chip 

1217

LazyCam (Beta) / Re: How do I order chains?

« on: January 03, 2008, 08:26:58 PM »

Hi, Spinnetti

I think you need LC Pro License  for that Feature.

If you post the DXF and order info I'll see if I can move them around.

Lcam file would probability be better, Then you should be able to enter your feed's, speed's and such after I post it back.

Thanks, Chip

1218

LazyCam (Beta) / Re: How do I order chains?

« on: January 03, 2008, 02:52:41 PM »

Hi, Dave

Just the S key, It's been there for a-while 6-12 months or so, I now it's working in LC 3.00, LC 3.00.1

Hears a screen shot of the beast.!!, Have no idea why it's not working for you.

Thanks, Chip

1219

LazyCam (Beta) / LazyCam 3.00.2

« on: January 03, 2008, 02:33:13 PM »

Hi, Brian

Happy New Year to All, OK, So I'm a few day's late on this, Hope the transition is going well.

Seeing your doing a little work on LC, Hears a few issues that are still hiding in Offsetting and Pocketing,In, Mill, Plasma, Foam.

I've tried this DXF in many way's/formats, grouped, un-grouped, exploded and saved with different cad program's, TurboCad V 8, BobCad V 22, Rino.....

Over different Ver's of LC it's worked from time to time, Hears the DXF and some screen shot's



Thanks, Chip 

1220

LazyCam (Beta) / Re: Lazy Cam 3.0 Tab Function

« on: January 02, 2008, 02:44:52 PM »

Hi, Mike

Haven't used this for a long time, I think your suppose to be able to drag them around, May not be implemented yet.

Thanks, Chip