Hello Guest it is April 20, 2024, 03:46:26 PM

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Topics - vadude

Pages: 1
1
LazyCam (Beta) / Ellipse shaped becomes a polygon in Lazycam
« on: December 13, 2010, 11:14:55 AM »
My Lazycam Pro is behaving in an inconsistent way.I tried exporting an ellipse drawn with an autocad 2000 into LC Pro but it shows up as a 6 sided polygon. I drew another ellipse saved with a different name and it never showed up at all under LC.
    However,I am able to import all other shapes into LC with no problem. A search through the forum with "ellipse lazycam" as key words yielded similar postings/problem 2 years ago but members response blames it on the CAD program.
    Does anyone has a fix here?

2
G-Code, CAD, and CAM discussions / Drill Holes
« on: November 20, 2010, 11:06:08 PM »
Can somebody walk me through how drill 4 holes with 0.25" diameter using a router bit size of 0.25" diameter using an autocad , Lazycam(unregistered) & Mach3.It was easy when i had a bit with  size of diameter 0.125"

3
I am using free version Lazycam (Version3.002) & mach3 but for  some unknown reasons ,any DXF  file;
i. downloaded from this forum
ii. generated using any software that output a dxf

    cuts fine on the first pass.However on the subsequent  passes to achieve the required depth,the x & y offset by some amount

   However,all dxf files from my cad software(Autodesk Architectural desktop 3.3) goes through my unregistered lazycam software to a registered mach3 to a finished cut with no problem.what am i doing wrong here?

4
LazyCam (Beta) / Cutting layers at different depths
« on: October 05, 2010, 09:22:05 PM »
I have an unregistered LC but for some reason cannot cut diff't layers at diff't depths.What am I doing wrong here?

5
General Mach Discussion / DXF file for Rack & Pinion
« on: December 06, 2009, 11:34:15 AM »
Hello everyone,
Does anyone has a dxf file for rack & pinion or  direct me to site where i can get it?

6
LazyCam (Beta) / Lacycam export to mach3 issues
« on: September 12, 2009, 09:56:20 PM »
I have a licensed mach3 with an unlicensed lazycam.I am able to upload a dxf file with a rectangle drawn in it to Lazycam.I inserted a text " test" into the rectangle & then deleted the rectangular outline.
I see the file as fomatted corectly in Lazycam/.However after loading it successfully into mach3,all i see 2 more chains added to my only chain 0 and a series of vertical & horizontal lines without the text that i am after.
   When I tried to cutting it,i see the machine trying to cut a pocket to the size of the rectangle without the rquired test.What am i doing wrong here?

7
General Mach Discussion / Lacycam export to mach issues
« on: September 12, 2009, 03:56:56 PM »
I have a licensed mach3 with an unlicensed lazycam.I am able to upload a dxf file with a rectangle drawn in it to Lazycam.I inserted a text " test" into the rectangle & then deleted the rectangular outline.
I see the file as fomatted corectly in Lazycam/.However after loading it successfully into mach3,all i see is a series of vertical & horizontal lines without the text that i am after.
   When I tried to cutting it,i see the machine trying to cut a pocket to the size of the rectangle without the rquired test.What am i doing wrong here?

Pages: 1