Messages

41

General Mach Discussion / Re: There is a God!!!!!Keygrabber Axis Gain question

« on: November 04, 2008, 02:13:21 AM »

Hi Brett,

I have this document in my computer but I've never looked into.

In Appendix 3, the whole chapter talks about KeyGrabber, that is more than enough for me.

thanks for pointing this out.

Weerasak

42

General Mach Discussion / Re: There is a God!!!!!Keygrabber Axis Gain question

« on: November 03, 2008, 08:42:49 AM »

Hi Brett,

you are the famous man, thanks for your knowledge.

Here in Thailand, I bought a joystick the number 2 only 5 us$ (150 baht) and I believe in China, people can buy half of this price.

Do you know where I can find KeyGrabber's manual or document? I need to learn more about it.

thanks

Weerasak

43

General Mach Discussion / Re: There is a God!!!!!Keygrabber Axis Gain question

« on: November 03, 2008, 04:55:52 AM »

Hello All,

Yet another version of joystick key mapping.

Just recently I wanted to utilize my joystick to use with Mach3, I did search for the information in this forum and most results were pointed to this thread.

After I read and tried, it took me for few minutes to get the concept how the KeyGrabber works and how to use it with Mach3. I made a short survey and mostly asked myself what I want from this joystick and the below is my preference.







From pictures above, if your local IT stores have these joysticks, it’s better to choose number 2 and 3 that will work with my mapping. While the number 1 has got only 1 stick to work but the others are just a dummy, has nothing inside.

The number 4 seems to have more buttons which include 2 extra function buttons for gamer, Turbo and Clear at the middle instead, KeyGrabber gets nothing from this 2 buttons.

you can download 1024W.set and Default.grab files from this link (all files are included in  Mach3_JoyStick.rar ).
    
http://www.cncroom.com/forum/index.php/topic,31.msg90.html#msg90

my position right now is Holding and I can not upload any files to the forum. Sorry about this.

Regards,

Weerasak

44

Promote and discuss your product / It's time to drive with MachDrive

« on: October 09, 2008, 12:05:01 AM »

Dear Members,

MachDrive is a result of my enthusiastic hobby. First I designed it for my own need, I needed a compact size and include basic necessary things
inside. Later I found that it could be sold, hopefully.

The MachDrive is CPLD-based, using LMD18245 proven reliable driver chip, 4 axis bipolar microstepping motor driver, able to drive up 3Amp 48 Vdc. All in one design including opto-isolated parallel port interface, charge pump, idle current reduction, high output current for driving external relays, all are packed inside small footprint of red anodized aluminum heat sink housing with convenience pluggable screw terminal. Works with Stepper and Direction controller software such as Mach2, Mach3.

               

Detail here-> http://www.cncroom.com/index.php?main_page=product_info&cPath=1&products_id=1&number_of_uploads=0&language=en

VDO here -> http://www.youtube.com/watch?v=vSwU62f35Kg


Best Regards,

Weerasak