Hello Guest it is November 15, 2019, 08:45:41 AM

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Messages - giordano

Pages: « 1 2 3 4 5 6 »
General Mach Discussion / problem with the modality Sherline
« on: January 23, 2008, 06:03:19 PM »
Hi Art. I have had to replace my computer and I have a problem with the modality Sherline. With the old PC, on your suggestion, I have resolved a problem of loss of footsteps planning the modality Sherline. With the new PC if imposes the modality Sherline, pressing the right arrow or the left arrow, the axle X always moves him in the same direction. The new PC has a processor AMD X2 4800 + with chipset ATI and 2Gb of ram. Can you help me? Thanks in advance, Giordano.

General Mach Discussion / Re: Contours of the footsteps don't closed
« on: January 19, 2008, 09:01:58 AM »
Hi. The problem is this: during the milling of the footsteps, the utensil a po lifts him before having finished the contour, that is before having reached the point of beginning of the milling. Excuse for mine bad English. Giordano

General Mach Discussion / Contours of the footsteps don't closed
« on: January 18, 2008, 07:28:49 AM »
Hi to everybody. I use Mach3 to mill the printed circuits. Last give versions the contours of the footsteps they don't result closed well. How can I resolve the problem? Thanks in advance. Giordano

General Mach Discussion / Re: Wrong working with Mach3.
« on: April 07, 2007, 03:09:39 AM »
Hi. In the preview the holes are to the center. I will try to reduce the speed.
The format of export of the post processor is important?
This line in the format 0.00: N4s G00 X14.84 Y14.71
The same line in the format 0.0000: N4 G00 X14.8361 Y14.7066. Thanks. Giordano

General Mach Discussion / Re: Wrong working with Mach3.
« on: April 06, 2007, 04:13:54 PM »
Hi Brian. The strange thing is that some holes are to the center and others no. The axle are planned to 10 mm / s and the acceleration to 50 mm / sec*sec. The motors are planned to 800 step for turn. Thanks. Giordano

General Mach Discussion / Wrong working with Mach3.
« on: April 05, 2007, 07:12:11 PM »
Wrong working with Mach3.
Hello to all. As it is looked at frm the images, the circuit made with Mach3 is not correct and with greater circuits the errors increase. I enclose also the working file. Thanks in advance. Giordano

Italian / Re: Italian Screenset
« on: January 28, 2007, 04:25:48 AM »
Ciao Franco. Non ne sono sicuro, mi sembra che Mach3 non lavori con un file di risorse esterno. In questo caso, finchè il produttore di Mach3 non cambia tipo di programmazione, la cosa è possibile solo utilizzando programmi del tipo 'Resource Hacker' ovviamente dietro consenso del produttore stesso. In questo caso, però, i testi tradotti sarebbero sovrascritti ad ogni aggiornamento installato. Poichè questi sono frequenti e non c'è ancora una versione definitiva, credo convenga aspettare per la traduzione. Saluti.

Finished Screens / Finished interface in Italian for Mach3
« on: September 10, 2006, 04:13:32 PM »
Hi to all. I have finished the translation of the interface of Mach3 in Italian. To decompress the files zip and to launch the program setup.exe.

Italian / Italian Screenset
« on: July 29, 2006, 02:36:23 AM »
Hi to all. I am making  translation in Italian of Mach3. Unfortunately I have some problems to translate you screen her Setting and Diagnostic. Can someone help? Thanks in advance. Giordano

General Mach Discussion / Re: Help for macro probe
« on: June 16, 2006, 06:59:51 PM »
You excuse maybe the question a few stupid, but I would like to know how a macro is employed and particularly that for the probe. Giordano.

Pages: « 1 2 3 4 5 6 »