Hello Guest it is April 20, 2024, 07:58:10 AM
Profile Guest

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - ZASto

Pages: « 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 »
31
General Mach Discussion / Re: computer shuts down when I try to load Mach 3
« on: January 04, 2022, 04:05:42 PM »
Looks right to me.
So you use 1024.set which is "default one", but I guess that is bit modified.
.lset is for lathe :)

Do not forget the license file! Mach1Lic.dat

32
General Mach Discussion / Re: computer shuts down when I try to load Mach 3
« on: January 04, 2022, 11:45:49 AM »
The only download site is this one that hosts this forum :)

https://www.machsupport.com/downloads-updates/mach3-downloads/

From your current installation, from c:\mach3 folder copy all .xml files to the USB stick, as well as all *.set files.
Then copy c:\mach3\brains folder to the stick if you have some brains used in your system.
Next, copy c:\mach3\bitmaps folder to the stick if you use some screenset different from derfault one.
And do not forget to copy c:\mach3\mach1lic.dat file to the stick, that is your license file.

Reinstall official version of Mach3 and copy back the files from the stick to the appropriate folders.

33
General Mach Discussion / Re: computer shuts down when I try to load Mach 3
« on: January 04, 2022, 05:47:18 AM »
You should be using R3.043.062 version (066 is much buggier an not oblainable on machsupport site)
I use Mach 3 on Windows XP for many years, and not connected ti Inernet, just to local LAN.
Never had any problems.

For CAD/CAM I run Win7 in virtual box (my basic OS is Linux).

34
General Mach Discussion / Re: computer shuts down when I try to load Mach 3
« on: January 02, 2022, 02:45:08 PM »
So, the moral of your story:
Do not take working machine controller out of the workshop and don't connect it to thr internet.
Local network is OK (for transfering files - GCode, from home to garage) :)

35
*****VIDEOS***** / Re: Happy New Year 2022 Greetings from Tokyo
« on: January 02, 2022, 03:22:15 AM »
Happy new year Yoshii-san!
Keep your amazing work going on.

36
G-Code, CAD, and CAM discussions / Re: Gcode error on line 0
« on: December 28, 2021, 01:52:02 PM »
Reinstalling is easy as 1-2-3 :)
Just back up your profile, if you use default one that you modified, licence file and folder with macros - just in case.

37
G-Code, CAD, and CAM discussions / Re: Gcode error on line 0
« on: December 18, 2021, 02:14:07 AM »
I see no problem with your Gcode.
If I remember correctly, maybe Mach3 went hiwire :) as it happened to me on one of my computers.
Try reinstalling Mach3, and do not use spaces in File name. Use at least underscore _

38
General Mach Discussion / Re: what is "brains"
« on: September 12, 2021, 01:47:00 PM »
Kind of PLC :)

39
General Mach Discussion / Re: May need to change computer that runs my mach 3 mill
« on: August 29, 2021, 04:44:12 AM »
Just copy Mach1Lic.dat from old computer to new one. It is located in C:\Mach3 directory :)

40
General Mach Discussion / Re: Reference all home after program ends
« on: August 10, 2021, 03:06:10 AM »
If your material is jamming your bit, rethink of  machining strategy.

Pages: « 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 »