Messages

261

Mach Screens / Re: LIcznik

« on: September 28, 2019, 03:11:53 PM »

T1M6
G17

G0X09.048Y08.090Z0
G0X0.000Z0.000
#1200=#1200+1
M30

Do you see where you made a mistake?

In the other topic of yours Graham wrote:

Then on the end of every g-code file just before the M30 enter

#1200 = #1200 +1

262

Mach Screens / Re: LIcznik

« on: September 28, 2019, 07:39:35 AM »

Graham already explained in your other topic: https://www.machsupport.com/forum/index.php?topic=41800.msg273153#msg273153

263

Mach Screens / Re: LIcznik

« on: September 27, 2019, 05:22:34 PM »

English, please

264

Mach3 and G-Rex / Re: Mach 111 stops while cnc router is cutting.

« on: September 26, 2019, 01:52:28 PM »

Welllll... you should activate your windows. Simple s that. You can activate it by phoning MS.

265

General Mach Discussion / Re: Cut quality problem

« on: September 22, 2019, 06:30:45 PM »

Gazillion of short segments, no arcs.
Even setting lookahead sky high will not help you having better part.
Your CAM is not generating G2/G3 code, only G1, which is linear interpolation versus circular interpolation.
I have no knowledge on madcam, I use Aspire (as is Tweakie) where I can do a curve fit.

266

General Mach Discussion / Re: STEPCRAFT Plugin

« on: September 19, 2019, 10:13:00 AM »

What kind of plugin you need?

http://cncdrive.com/UC100.html

If you have UC100 plugin costs nothing, you just had to ask MrG(oogle)

267

Finished Screens / Re: Mach Blue Probing by Big-Tex - new version 3.4 avaliable soon

« on: September 15, 2019, 12:53:18 PM »

I don't know what happened with Thomas,exchanged a couple of e-mails withhim, but he did not fix his page
I've bought his screenset and I know where it is still obtainable, but it would be unfair to share that location.

Send Thomas an e-mail, will provide you his address through PM

268

General Mach Discussion / Re: Go to Zero extremely slow, please help

« on: September 13, 2019, 04:48:13 AM »

If your machine have no home switches then soft limits are inoperative.

269

General Mach Discussion / Re: Trying to install a bit probe

« on: August 31, 2019, 03:58:40 AM »

TRy to find Big-Tex tool setter screenset, it is good for manual tool changes. I use it regullary when carving and do not have top of the materiall accessible after first tool.

270

General Mach Discussion / Re: Dogbone corners

« on: July 25, 2019, 02:29:46 AM »

Mach3 is strictly machine controller not a CAD/CAM software.
Vectric Aspire has dogbone tool. So, you create dogbones in CAD software. Mach will happily cut them after generating G-code in CAM.