Messages

41

Show"N"Tell ( Your Machines) / Re: Prima Lathe conversion

« on: September 25, 2013, 05:31:38 AM »

Zafar seems this time you are not using SmoothStepper Can you please share the advantages of using UC100 over smoothstepper. Price of UC100?

42

Show"N"Tell ( Your Machines) / Re: Prima Lathe conversion

« on: September 19, 2013, 02:37:51 AM »

I do know you are presently involved in too many projects. If i consider this project  "one and only" in your hand then i bit definetly you will do it within 10 days.
Alas... I wished my hobby relevant to my job i also wana feel like you ...

43

Show"N"Tell ( What you have made with your CNC machine.) / Re: Fun project, hopefully a moneymaker!

« on: September 18, 2013, 12:55:02 PM »

show us a brief video..unable to believe MDF can be a mold for melted metal pouring..

44

Show"N"Tell ( Your Machines) / Re: Prima Lathe conversion

« on: September 18, 2013, 12:46:28 PM »

Hi Zafar,
Great .. Love to see it operational within a month..This seems not a big project;)

45

Brains Development / Re: axis homing with encoder

« on: September 06, 2013, 02:39:15 PM »

chhaaaa gya ustad...well done... someday i wish learn all that stuff from u zafar..

46

Show"N"Tell ( Your Machines) / Re: CNC conversion of radial drill - Novisa TRO 65/80/2000

« on: April 14, 2013, 09:40:18 AM »

Khalid,
 have you tried doing a finish pass to get rid of that chatter, maybe something like 0.2 or 0.5 left for a finish pass on the profile will allow it to give you a nice clean finish.
Hood

Hood thank you for the suggestion. The clamping was very poor. However, i have to left some stock to do final finish machining. Thanks Hood for the great tip. I shall remember whenever i do Aluminum or any other material machining again.
Regards

47

Show"N"Tell ( Your Machines) / Re: CNC conversion of radial drill - Novisa TRO 65/80/2000

« on: April 13, 2013, 07:19:27 AM »

Hi ,
Some finish product out of CNC machine. We have some chattering issues on the edges but overall the quality is good.

48

Show"N"Tell ( Your Machines) / Re: CNC conversion of radial drill - Novisa TRO 65/80/2000

« on: April 13, 2013, 02:14:17 AM »

@Hood: Thank you but all credit goes to Zafar Salam.

@ Zafar Bhae.. This machine is your converted Radial Drill Machine.   I shall soon post some more picture as the milling on the Radial drill is now in progress.

49

General Mach Discussion / Re: Customization Options

« on: April 12, 2013, 02:08:16 PM »

nice explanation Hood. Thank you i learn something today.

50

Show"N"Tell ( Your Machines) / Re: CNC conversion of radial drill - Novisa TRO 65/80/2000

« on: April 12, 2013, 01:54:41 PM »

Some more work on Aluminum.
Dimension: 750 x550mm
Thickness= 15mm

Tool Used: 3mm Centre drill, 6.8mm drill, 9mm drill, 10mm HSS drill, 10mm HSco Dormer endmill
Attached pictures are the result of 8 Hrs continuous working of machine.  We just stopped it and the remaining work shall be completed by tomorrow.