Messages

41

Galil / Re: icm 2900 screw connectors

« on: March 01, 2014, 04:27:15 PM »

I should be able to let you know next week.
Cory at Galil looked it up for me and sent me a PDF on the part.

I attached the PDF to this post

42

Galil / Re: Problems with losing position

« on: March 01, 2014, 12:48:17 AM »

CNCToolDie,

Try out this plugin: http://www.smcomp.com/~smurph/galil/Galil-st.zip

See if it fixes the stop problem.

Hey Smurph has the Plugin in the Downlaods section been updated to this?

Steve

43

Galil / Re: icm 2900 screw connectors

« on: February 22, 2014, 08:04:42 PM »

Still looking

44

Galil / Re: Galil ICM 2900 7407 enable IC

« on: February 22, 2014, 08:04:07 PM »

No longer need this

45

Galil / Re: Galil Error: Could not access DMC Data record

« on: February 22, 2014, 08:03:27 PM »

Try to rename the m3p to .dll did not work for me.

Wiped Mach3 and new install M3p plugin worked perfect!

46

Galil / Re: Galil Error: Could not access DMC Data record

« on: February 22, 2014, 08:02:16 PM »

Fixed.

If it happens to you make sure you have the correct driver.

47

Galil / Re: Galil Error: Could not access DMC Data record

« on: February 22, 2014, 06:27:44 PM »

Looks like I was using the wrong plugin.
I deleted the plugin and found the .dll in the plugins directory.

Downloaded the Galil-st plugin.

Now when double clicking on the m3p file windows asks what program to open it with. It does not run.

For the hell of it I tried to install the first Plugin sane problem windows ask what program to run it with.

WHAT AM I DOING WRONG !!!!!!!!!!!!!!!!!!

I am not new to doing the CNC software/ controller setup, But getting Mach up and running is kicking my a$$

48

Galil / Re: Galil Error: Could not access DMC Data record

« on: February 22, 2014, 04:03:55 PM »

Please Help!

I am still at it with zero results.

49

Galil / Galil Error: Could not access DMC Data record

« on: February 21, 2014, 06:59:32 PM »

Hi Guys,

I am trying to get my PC setup to connect to controller.
Galil Optima 1830 is installed

Controller / drives etc is not connected yet.

I have xp pro 32 bit setup with all updates.
Mach 3 installed Demo mode
Galil plug in installed.

Have configured Plugin per PDF included in download

The plugin sees my Galil card

When I launch Mach 3 now in the Status bar I get this message
Galil Error: Could not access DMC Data record

I have been reading
 Mach3 CNC Controller Software Installation and Configuration Version 3 Manual

I am a bit confused as to what takes priority the PDF DOC in the plug in or the main manual.

Any help would be very helpful!   Getting frustrated.
 

50

Galil / Galil ICM 2900 7407 enable IC

« on: February 21, 2014, 01:00:38 PM »

Hi Folks,

If someone has a ICM 2900 that you can open the case easy could you please give me the exact numbers on the 7407 ic chip.

I had to change my chip to the 7406 years ago and can not find what I did with the 7407. And now I need to use it for my new machine build.

I talked to support at Galil, but the were unable to find the numbers for me.
I see there are a few different types.

Thanks,
Joe