4871
General Mach Discussion / Re: Problems threading on the lathe
« on: February 21, 2010, 08:23:55 PM »
Hi all,
I am sorry about not updating the write up.
I have comments marked in mine and thought that i had updated it some time ago and posted the update.
Obvioulsy not.........
The main thing is that the diagnostics is no longer functional, so....
Ignore most of page 19/ fig 3.7.1 & 3.7.2
Page 42, ignore the third paragraph
Page 45, ignore verbage related to and figure 7.1.5
Page 46, ignore the whole page
,and you need to use an M3 or spindle button to turn the spindle on or you won't get an rpm reading in the dro...
this was done so Mach would be able to read low rpm's ie; it informed MAch to start looking for the index pulse as it relates to rpm
RICH
I am sorry about not updating the write up.
I have comments marked in mine and thought that i had updated it some time ago and posted the update.
Obvioulsy not.........
The main thing is that the diagnostics is no longer functional, so....
Ignore most of page 19/ fig 3.7.1 & 3.7.2
Page 42, ignore the third paragraph
Page 45, ignore verbage related to and figure 7.1.5
Page 46, ignore the whole page
,and you need to use an M3 or spindle button to turn the spindle on or you won't get an rpm reading in the dro...
this was done so Mach would be able to read low rpm's ie; it informed MAch to start looking for the index pulse as it relates to rpm
RICH