4501
General Mach Discussion / Re: Drifting X-axis, making step ladders one side whereas other side is smooth- SOS
« on: July 10, 2010, 09:27:37 AM »
Measure the voltage, say, from the control panel box to an earth ground / water pipe. Only a few milli amps can be a hazard.
You should not be getting any shock from the panel. So safety first.
Trace out the wiring, draw a schematic, post it and someone will take a look to see what's wrong.
Don't use it until you have made it safe.
RICH
You should not be getting any shock from the panel. So safety first.
Trace out the wiring, draw a schematic, post it and someone will take a look to see what's wrong.
Don't use it until you have made it safe.
RICH