1
dspMC/IP Motion Controller / Re: Repeating
« on: March 27, 2010, 04:51:51 AM »
I thought that DSPMC controller is not capable count so many pulses in higher speed, that's why I reduce pulses.
I did one more test. I test repeating (with indicator) just in DSPMC AxisWorks softwear. Here I made the same conclusions like in Mach, at higher speeds it sometime loose position (just a few microns).
I have max. emulation 1024 pulses/rotation.
In the previous post I made a mistake I didn't wrote correctly. I have 800 steps per mm.
So, I'm allmost in the same ratio as you are.
Thanks
I did one more test. I test repeating (with indicator) just in DSPMC AxisWorks softwear. Here I made the same conclusions like in Mach, at higher speeds it sometime loose position (just a few microns).
I have max. emulation 1024 pulses/rotation.
In the previous post I made a mistake I didn't wrote correctly. I have 800 steps per mm.
So, I'm allmost in the same ratio as you are.
Thanks