Hello Guest it is January 24, 2022, 02:45:46 PM

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - benjamint76

Pages: « 1 2 3 »
11
General Mach Discussion / Re: home x homes all axis'
« on: July 07, 2017, 08:55:45 PM »
I created a button in a screen designer, I simply selected the radio button for home x, so no macro was created

12
General Mach Discussion / Re: Text / engraving problem.
« on: July 07, 2017, 02:43:34 PM »
I use BobCAD and of course mach3.

I have had those issues in the past with earlier versions of BobCAD. I currently use V25 and have had no real issues.

When I did have issues, i would check out my gcode using descriminator (http://www.cncedit.com/). I often found random swirls and such.

Sometimes I was unable to fix the problem and would need to start fresh with a new file.

13
General Mach Discussion / Re: home x homes all axis'
« on: July 07, 2017, 01:57:31 PM »
I will also add that I am able to use "G28.1 X1."

But I just can't figure out why all of the sudden "home x" or DoButton(24) continues to home the z axis, then the y axis, then the x axis.

I am using a Warp 9 ESS and a PMDX 126.

I did add some outputs, which function perfectly.  I did disable a relay on the PMDX as it was using up an output pin...

I am stumped,
Ben

14
General Mach Discussion / home x homes all axis'
« on: July 07, 2017, 12:45:01 PM »
Hi,

I had my machine working just fine.

I created a button that said "home x" and it would home x

Now when I press the same button, it homes all axis' as if I hit "ref home"

Any ideas?

Thanks
Ben

15
General Mach Discussion / Re: lost when it comes to nesting
« on: April 29, 2009, 12:59:21 AM »
In my previous post, that was just a test to get things to work. If I replace the Y[#5] with Y0., things work out perfectly, but once i introduce a variable, the line does not work. I read some other posts, and it seems that others have had luck with using variables. I don't know what I am missing. Another piece of the puzzle is that when using Y[#5] mach3 gives me this code: Radius to end of arc differs from radius to startLine. I have searched this as well and the answer dealt with abs. vs incremental. I tried all of those suggestions and still no luck.

Do I need to scrap the G02 IJ method and just go with using a radius method(i don't kow, I think I read that somewhere...)Sorry for all of the lines of codes.
Btw- I am just making soap dishes out of walnut. They resemble magged bicycle wheels. My sister, a metallurgical engineer, lost her job so she is having a go at soap making. I'm just trying to help her out. I am trying to create more than one at a time since I do not have a ATC.
Once again,
Thanks

%
O00100 ( PROGRAM NUMBER)

( BEGIN PREDATOR NC HEADER)
( MACH_FILE=4AXVMILL.MCH)
( MTOOL T11 S1 D.25 H5. DIAM_OFFSET 11 = .125)
( MTOOL T41 S1 D.375 H1.825 DIAM_OFFSET 41 = .1875)
( MTOOL T16 S1 D.5 H2.75 DIAM_OFFSET 16 = .25)
( SBOX X-2.5 Y-2.5 Z-1. L5. W5. H1.)
( END PREDATOR NC HEADER)

( PROGRAM NAME - MAGS_ROUNDOVER.TAP)
( POST -  MACH 3 MILL NO ATC - BCV23)
( DATE - TUE. 04/28/2009)
( TIME - 07:01PM)

N01 G20 G40 G49 G54 G80 G90 G91.1
N06 G53 Z2. F80

#10=0.
#15=0.
#20=0.
#25=0.
#30=0.
#35=0.
#40=0.
#55=0.
#60=0.
#65=0.
#100=0.
#105=0.
#110=0.
#120=0.
#125=0.

( FIRST CUT - FIRST TOOL)

N11 T11
N16 G00 G90 G54 X-2.5 Y2.5 S504 M03
N21 G43 H11 Z.1 M08
N26 G81 G98 X-2.5 Y2.5 Z-.06 R.1 F40.
N31 M98 P10 L6 ( SUBPROGRAM CALL CENTER DRILL)
N36 M09
N41 M05
N46 G53 Z4. F80
N51 G53 X0. Y0.
N56 M01
N61 G53 Z4.

( NEXT CUT - NEXT TOOL)

N66 T41
N71 G00 G90 G54 X1.9375 Y0. M05
N76 G43 H41 Z.1 M08
N81 M98 P15 L5 ( SUBPROGRAM CALL OUTSIDE ROUNDOVER)
N86 G00 Z.1

( NEXT CUT - SAME TOOL)

N91 G90 G54 X1.5625 Y0.
N96 M98 P20 L5 ( SUBPROGRAM CALL)
N101 G00 Z.1

( NEXT CUT - SAME TOOL)

N106 G90 G54 X-1.1131 Y-.9097
N111 M98 P25 L5 ( SUBPROGRAM CALL)
N116 G00 Z.1

( NEXT CUT - SAME TOOL)

N121 G90 G54 X-.2313 Y1.4188
N126 M98 P30 L5 ( SUBPROGRAM CALL)
N131 G00 Z.1

( NEXT CUT - SAME TOOL)

N136 G90 G54 X1.3443 Y-.5091
N141 M98 P35 L5 ( SUBPROGRAM CALL)
N146 G00 Z.1
N151 M09
N156 M05
N161 G53 Z4. F80
N166 G53 X0. Y0.
N171 M01
N176 G53 Z4.

( NEXT CUT - NEXT TOOL)

N181 T16
N186 G90 G54 X.13 Y0. M05
N191 G43 H16 Z.1 M08
N196 M98 P40 L5 ( SUBPROGRAM CALL)
N201 X-.8801 Y-.802
N206 M98 P55 L5 ( SUBPROGRAM CALL)
N211 X-.2545 Y1.1631
N216 M98 P60 L5 ( SUBPROGRAM CALL)
N221 X1.1345 Y-.3612
N226 M98 P65 L5 ( SUBPROGRAM CALL)

( NEXT CUT - SAME TOOL)

N231 G90 G54 X-.3027 Y2.1538
N236 M98 P100 L5 ( SUBPROGRAM CALL)
N241 G00 Z.1

( NEXT CUT - SAME TOOL)

N246 G90 G54 X.3027 Y-2.1538
N251 M98 P105 L5 ( SUBPROGRAM CALL)
N256 G00 Z.1

( NEXT CUT - SAME TOOL)

N261 G90 G54 X-.2957 Y2.1043
N266 M98 P110 L5 ( SUBPROGRAM CALL)
N271 G00 Z.1

( NEXT CUT - SAME TOOL)

N276 G90 G54 X.2957 Y-2.1043
N281 M98 P115 L5 ( SUBPROGRAM CALL)
N286 G00 Z.1

( NEXT CUT - SAME TOOL)

N291 G90 G54 X.2957 Y2.1043
N296 M98 P120 L5 ( SUBPROGRAM CALL)
N301 G00 Z.1

( NEXT CUT - SAME TOOL)

N306 G90 G54 X-.2957 Y-2.1043
N311 M98 P125 L5 ( SUBPROGRAM CALL)
N316 G00 Z.1
N321 M09
N326 M05
N331 G53 Z2.
N336 G53 X0. Y0.
N341 M02

O10 (SUBPROGRAM OF O100)
X2.5
Y[-2.5+#10]
X-2.5
#10=[#10+5.]
G80
M99 ( SUBPROGRAM RETURN)

O15 (SUBPROGRAM OF O100)
G01 Z-.125 F80.
G17 G03 X1.9375 Y[0.+#15] I-1.9375 J0. F70.
G01 Z-.25 F80.
G03 X1.9375 Y[0.+#15] I-1.9375 J0. F70.
#15=[#15+5.]
M99 ( SUBPROGRAM RETURN)

O20 (SUBPROGRAM OF O100)
G01 Z-.125 F80.
G03 X1.5625 Y[0.+#20] I-1.5625 J0. F70.
G01 Z-.25 F80.
G03 X1.5625 Y[0.+#20] I-1.5625 J0. F70.
#20=[5.+#20]
M99 ( SUBPROGRAM RETURN)

O25 (SUBPROGRAM OF O100)
G01 Z-.125 F80.
G02 X-1.1131 Y[.9097+#25] I1.1131 J.9097 F70.
X-.7235 Y[.8781+#25] I.1839 J-.1503
G01 X-.4459 Y[.3972+#25]
G02 X-.4459 Y[-.3972+#25] I-.6881 J-.3972
G01 X-.7235 Y[-.8781+#25]
G02 X-1.1131 Y[-.9097+#25] I-.2057 J.1188
G01 Z-.25 F80.
G02 X-1.1131 Y[.9097+#25] I1.1131 J.9097 F70.
X-.7235 Y[.8781+#25] I.1839 J-.1503
G01 X-.4459 Y[.3972+#25]
G02 X-.4459 Y[-.3972+#25] I-.6881 J-.3972
G01 X-.7235 Y[-.8781+#25]
G02 X-1.1131 Y[-.9097+#25] I-.2057 J.1188
G01 Z-.375 F80.
G02 X-1.1131 Y[.9097+#25] I1.1131 J.9097 F70.
X-.7235 Y[.8781+#25] I.1839 J-.1503
G01 X-.4459 Y[.3972+#25]
G02 X-.4459 Y[-.3972+#25] I-.6881 J-.3972
G01 X-.7235 Y[-.8781+#25]
G02 X-1.1131 Y[-.9097+#25] I-.2057 J.1188
G01 Z-.5 F80.
G02 X-1.1131 Y[.9097+#25] I1.1131 J.9097 F70.
X-.7235 Y[.8781+#25] I.1839 J-.1503
G01 X-.4459 Y[.3972+#25]
G02 X-.4459 Y[-.3972+#25] I-.6881 J-.3972
G01 X-.7235 Y[-.8781+#25]
G02 X-1.1131 Y[-.9097+#25] I-.2057 J.1188
#25=[#25+5.]
M99 ( SUBPROGRAM RETURN)

O30 (SUBPROGRAM OF O100)
G01 Z-.125 F80.
G02 X1.3443 Y[#30+.5091] I.2313 J-1.4188 F70.
X1.1222 Y[#30+.1875] I-.2221 J-.0841
G01 X.567
G02 X-.1211 Y[#30+.5847] I0. J.7945
G01 X-.3987 Y[#30+1.0656]
G02 X-.2313 Y[#30+1.4188] I.2057 J.1187
G01 Z-.25 F80.
G02 X1.3443 Y[#30+.5091] I.2313 J-1.4188 F70.
X1.1222 Y[#30+.1875] I-.2221 J-.0841
G01 X.567
G02 X-.1211 Y[#30+.5847] I0. J.7945
G01 X-.3987 Y[#30+1.0656]
G02 X-.2313 Y[#30+1.4188] I.2057 J.1187
G01 Z-.375 F80.
G02 X1.3443 Y[#30+.5091] I.2313 J-1.4188 F70.
X1.1222 Y[#30+.1875] I-.2221 J-.0841
G01 X.567
G02 X-.1211 Y[#30+.5847] I0. J.7945
G01 X-.3987 Y[#30+1.0656]
G02 X-.2313 Y[#30+1.4188] I.2057 J.1187
G01 Z-.5 F80.
G02 X1.3443 Y[#30+.5091] I.2313 J-1.4188 F70.
X1.1222 Y[#30+.1875] I-.2221 J-.0841
G01 X.567
G02 X-.1211 Y[#30+.5847] I0. J.7945
G01 X-.3987 Y[#30+1.0656]
G02 X-.2313 Y[#30+1.4188] I.2057 J.1187
#30=[#30+5.]
M99 ( SUBPROGRAM RETURN)

O35 (SUBPROGRAM OF O100)
G01 Z-.125 F80.
G02 X-.2313 Y[#35+-1.4188] I-1.3443 J.5091 F70.
X-.3987 Y[#35+-1.0656] I.0382 J.2344
G01 X-.1211 Y[#35+-.5847]
G02 X.567 Y[#35+-.1875] I.6881 J-.3972
G01 X1.1222
G02 X1.3443 Y[#35+-.5091] I0. J-.2375
G01 Z-.25 F80.
G02 X-.2313 Y[#35+-1.4188] I-1.3443 J.5091 F70.
X-.3987 Y[#35+-1.0656] I.0382 J.2344
G01 X-.1211 Y[#35+-.5847]
G02 X.567 Y[#35+-.1875] I.6881 J-.3972
G01 X1.1222
G02 X1.3443 Y[#35+-.5091] I0. J-.2375
G01 Z-.375 F80.
G02 X-.2313 Y[#35+-1.4188] I-1.3443 J.5091 F70.
X-.3987 Y[#35+-1.0656] I.0382 J.2344
G01 X-.1211 Y[#35+-.5847]
G02 X.567 Y[#35+-.1875] I.6881 J-.3972
G01 X1.1222
G02 X1.3443 Y[#35+-.5091] I0. J-.2375
G01 Z-.5 F80.
G02 X-.2313 Y[#35+-1.4188] I-1.3443 J.5091 F70.
X-.3987 Y[#35+-1.0656] I.0382 J.2344
G01 X-.1211 Y[#35+-.5847]
G02 X.567 Y[#35+-.1875] I.6881 J-.3972
G01 X1.1222
G02 X1.3443 Y[#35+-.5091] I0. J-.2375
#35=[#35+5.]
M99 ( SUBPROGRAM RETURN)

O40 (SUBPROGRAM OF O100)
G01 Z0. F70.
X.1504 Y[#40+-.0009] Z-.0036
X.1707 Y[#40+-.0037] Z-.0072
X.1912 Y[#40+-.0085] Z-.0109
X.2088 Y[#40+-.0142] Z-.0142
X.2271 Y[#40+-.022] Z-.0177
X.2433 Y[#40+-.0305] Z-.0209
X.2559 Y[#40+-.0384] Z-.0235
X.2705 Y[#40+-.0491] Z-.0267
X.2859 Y[#40+-.0625] Z-.0303
X.2976 Y[#40+-.0745] Z-.0333
X.3098 Y[#40+-.0893] Z-.0367
X.3229 Y[#40+-.1086] Z-.0408
X.334 Y[#40+-.1292] Z-.0449
X.3427 Y[#40+-.1502] Z-.0489
X.3488 Y[#40+-.1706] Z-.0527
X.3535 Y[#40+-.1945] Z-.057
X.3553 Y[#40+-.2132] Z-.0603
X.3556 Y[#40+-.2299] Z-.0633
X.3547 Y[#40+-.2463] Z-.0661
X.3524 Y[#40+-.2638] Z-.0693
X.3469 Y[#40+-.2878] Z-.0736
X.3403 Y[#40+-.3075] Z-.0773
X.3328 Y[#40+-.3247] Z-.0806
X.3237 Y[#40+-.3414] Z-.0839
X.3118 Y[#40+-.3594] Z-.0877
X.3 Y[#40+-.374] Z-.091
X.2874 Y[#40+-.3874] Z-.0943
X.2743 Y[#40+-.3992] Z-.0974
X.2567 Y[#40+-.4124] Z-.1013
X.2404 Y[#40+-.4225] Z-.1047
X.2221 Y[#40+-.4317] Z-.1083
X.1996 Y[#40+-.4403] Z-.1125
X.1782 Y[#40+-.4461] Z-.1164
X.1572 Y[#40+-.4497] Z-.1202
X.1324 Y[#40+-.4513] Z-.1246
X.1098 Y[#40+-.4504] Z-.1286
X.0841 Y[#40+-.4466] Z-.1331
X.0588 Y[#40+-.4398] Z-.1378
X.0357 Y[#40+-.4307] Z-.1421
X.0158 Y[#40+-.4203] Z-.1461
X-.0018 Y[#40+-.4088] Z-.1498
X-.0176 Y[#40+-.3963] Z-.1534
X-.0304 Y[#40+-.3844] Z-.1565
X-.0438 Y[#40+-.3695] Z-.16
X-.057 Y[#40+-.352] Z-.1639
X-.0683 Y[#40+-.3334] Z-.1677
X-.0765 Y[#40+-.3166] Z-.171
X-.0837 Y[#40+-.298] Z-.1745
X-.0905 Y[#40+-.2736] Z-.179
X-.0945 Y[#40+-.2486] Z-.1835
X-.0956 Y[#40+-.2269] Z-.1873
X-.0944 Y[#40+-.2018] Z-.1917
X-.0927 Y[#40+-.1894] Z-.1939
X-.0898 Y[#40+-.1747] Z-.1966
X-.0865 Y[#40+-.162] Z-.1989
X-.0817 Y[#40+-.1476] Z-.2015
X-.0763 Y[#40+-.1343] Z-.2041
X-.0692 Y[#40+-.1196] Z-.207
X-.0618 Y[#40+-.1068] Z-.2096
X-.0536 Y[#40+-.0944] Z-.2122
X-.0371 Y[#40+-.074] Z-.2168
X-.0267 Y[#40+-.0633] Z-.2195
X-.0164 Y[#40+-.054] Z-.2219
X-.0062 Y[#40+-.0457] Z-.2242
X.0063 Y[#40+-.0369] Z-.2269
X.0174 Y[#40+-.0301] Z-.2292
X.0312 Y[#40+-.0228] Z-.232
X.0526 Y[#40+-.0137] Z-.2361
X.0666 Y[#40+-.0091] Z-.2387
X.0786 Y[#40+-.0059] Z-.2409
X.104 Y[#40+-.0015] Z-.2454
X.13 Y[#40+0.] Z-.25
G17 G02 X.13 Y[#40+0.] I-.13 J0.
G01 X.38
G02 X.38 Y[#40+0.] I-.38 J0.
G01 X.63
G02 X.63 Y[#40+0.] I-.63 J0.
G01 X.88
G02 X.88 Y[#40+0.] I-.88 J0.
G01 X1.13
G02 X1.13 Y[#40+0.] I-1.13 J0.
G01 X1.38
G02 X1.38 Y[#40+0.] I-1.38 J0.
G00 Z.1
#40=[#40+5.]
M99 ( SUBPROGRAM RETURN)

O55 (SUBPROGRAM OF O100)
G01 Z0. F70.
X-.8729 Y[#55+-.7919] Z-.0022
X-.7174 Y[#55+-.5226] Z-.0571
X-.9339 Y[#55+-.3976] Z-.1011
X-.8118 Y[#55+-.186] Z-.1442
X-.7968 Y[#55+-.1572] Z-.1499
X-.7844 Y[#55+-.1272] Z-.1557
X-.7746 Y[#55+-.0963] Z-.1614
X-.7676 Y[#55+-.0646] Z-.1671
X-.7633 Y[#55+-.0324] Z-.1728
X-.7619 Y[#55+0.] Z-.1785
X-.7633 Y[#55+.0324] Z-.1843
X-.7676 Y[#55+.0646] Z-.19
X-.7746 Y[#55+.0963] Z-.1957
X-.7844 Y[#55+.1272] Z-.2014
X-.7968 Y[#55+.1572] Z-.2072
X-.8118 Y[#55+.186] Z-.2129
X-.9339 Y[#55+.3976] Z-.256
X-.9539 Y[#55+.3469] Z-.2656
X-.9711 Y[#55+.2952] Z-.2752
X-.9856 Y[#55+.2427] Z-.2848
X-.9972 Y[#55+.1895] Z-.2944
X-1.0059 Y[#55+.1358] Z-.304
X-1.0117 Y[#55+.0816] Z-.3136
X-1.0146 Y[#55+.0272] Z-.3232
Y[#55+-.0272] Z-.3328
X-1.0117 Y[#55+-.0816] Z-.3424
X-1.0059 Y[#55+-.1358] Z-.352
X-.9972 Y[#55+-.1895] Z-.3616
X-.9856 Y[#55+-.2427] Z-.3712
X-.9711 Y[#55+-.2952] Z-.3808
X-.9539 Y[#55+-.3469] Z-.3904
X-.9339 Y[#55+-.3976] Z-.4
G02 X-.9339 Y[#55+.3976] I.9339 J.3976
G01 X-.8118 Y[#55+.186]
G02 X-.8118 Y[#55+-.186] I-.3222 J-.186
G01 X-.9339 Y[#55+-.3976]
X-.7174 Y[#55+-.5226]
X-.8729 Y[#55+-.7919]
G02 X-.9795 Y[#55+-.8005] I-.0563 J.0325
X-.9795 Y[#55+.8005] I.9795 J.8005
X-.8729 Y[#55+.7919] I.0503 J-.0411
G01 X-.5952 Y[#55+.311]
G02 X-.5952 Y[#55+-.311] I-.5387 J-.311
G01 X-.7174 Y[#55+-.5226]
G00 Z.1
X-.9978 Y[#55+.1859]
Z-.3
G01 Z-.4 F70.
X-1.0063 Y[#55+.1325] Z-.4096
X-1.0119 Y[#55+.0786] Z-.4191
X-1.0147 Y[#55+.0246] Z-.4286
X-1.0146 Y[#55+-.0296] Z-.4382
X-1.0116 Y[#55+-.0836] Z-.4477
X-1.0057 Y[#55+-.1374] Z-.4573
X-.9969 Y[#55+-.1908] Z-.4668
X-.9853 Y[#55+-.2437] Z-.4764
X-.9709 Y[#55+-.2959] Z-.4859
X-.9538 Y[#55+-.3472] Z-.4955
X-.9339 Y[#55+-.3976] Z-.505
G02 X-.9339 Y[#55+.3976] I.9339 J.3976
G01 X-.8118 Y[#55+.186]
G02 X-.8118 Y[#55+-.186] I-.3222 J-.186
G01 X-.9339 Y[#55+-.3976]
X-.7174 Y[#55+-.5226]
X-.8729 Y[#55+-.7919]
G02 X-.9795 Y[#55+-.8005] I-.0563 J.0325
X-.9795 Y[#55+.8005] I.9795 J.8005
X-.8729 Y[#55+.7919] I.0503 J-.0411
G01 X-.5952 Y[#55+.311]
G02 X-.5952 Y[#55+-.311] I-.5387 J-.311
G01 X-.7174 Y[#55+-.5226]
G00 Z.1
#55=[#55+5.]
M99 ( SUBPROGRAM RETURN)

O60 (SUBPROGRAM OF O100)
G01 Z0. F70.
X-.2493 Y[#60+1.1519] Z-.0022
X-.0939 Y[#60+.8826] Z-.0571
X.1227 Y[#60+1.0076] Z-.1011
X.2448 Y[#60+.796] Z-.1442
X.2622 Y[#60+.7686] Z-.1499
X.282 Y[#60+.7429] Z-.1557
X.3039 Y[#60+.719] Z-.1614
X.3278 Y[#60+.697] Z-.1671
X.3536 Y[#60+.6773] Z-.1728
X.381 Y[#60+.6598] Z-.1785
X.4097 Y[#60+.6449] Z-.1843
X.4397 Y[#60+.6324] Z-.19
X.4707 Y[#60+.6227] Z-.1957
X.5024 Y[#60+.6157] Z-.2014
X.5345 Y[#60+.6114] Z-.2072
X.567 Y[#60+.61] Z-.2129
X.8112 Z-.256
X.7774 Y[#60+.6526] Z-.2656
X.7412 Y[#60+.6934] Z-.2752
X.703 Y[#60+.7321] Z-.2848
X.6627 Y[#60+.7688] Z-.2944
X.6205 Y[#60+.8032] Z-.304
X.5765 Y[#60+.8354] Z-.3136
X.5309 Y[#60+.8651] Z-.3232
X.4837 Y[#60+.8923] Z-.3328
X.4352 Y[#60+.917] Z-.3424
X.3854 Y[#60+.939] Z-.352
X.3345 Y[#60+.9583] Z-.3616
X.2826 Y[#60+.9749] Z-.3712
X.2299 Y[#60+.9886] Z-.3808
X.1765 Y[#60+.9995] Z-.3904
X.1227 Y[#60+1.0076] Z-.4
G02 X.8112 Y[#60+.61] I-.1227 J-1.0076
G01 X.567
G02 X.2448 Y[#60+.796] I0. J.372
G01 X.1227 Y[#60+1.0076]
X-.0939 Y[#60+.8826]
X-.2493 Y[#60+1.1519]
G02 X-.2035 Y[#60+1.2485] I.0563 J.0325
X1.183 Y[#60+.448] I.2035 J-1.2485
X1.1222 Y[#60+.36] I-.0608 J-.023
G01 X.567
G02 X.0283 Y[#60+.671] I0. J.622
G01 X-.0939 Y[#60+.8826]
G00 Z.1
X.6599 Y[#60+.7712]
Z-.3
G01 Z-.4 F70.
X.6179 Y[#60+.8053] Z-.4096
X.5741 Y[#60+.8371] Z-.4191
X.5286 Y[#60+.8665] Z-.4286
X.4817 Y[#60+.8934] Z-.4382
X.4334 Y[#60+.9178] Z-.4477
X.3838 Y[#60+.9396] Z-.4573
X.3332 Y[#60+.9588] Z-.4668
X.2816 Y[#60+.9752] Z-.4764
X.2292 Y[#60+.9888] Z-.4859
X.1762 Y[#60+.9996] Z-.4955
X.1227 Y[#60+1.0076] Z-.505
G02 X.8112 Y[#60+.61] I-.1227 J-1.0076
G01 X.567
G02 X.2448 Y[#60+.796] I0. J.372
G01 X.1227 Y[#60+1.0076]
X-.0939 Y[#60+.8826]
X-.2493 Y[#60+1.1519]
G02 X-.2035 Y[#60+1.2485] I.0563 J.0325
X1.183 Y[#60+.448] I.2035 J-1.2485
X1.1222 Y[#60+.36] I-.0608 J-.023
G01 X.567
G02 X.0283 Y[#60+.671] I0. J.622
G01 X-.0939 Y[#60+.8826]
G00 Z.1
#60=[#60+5.]
M99 ( SUBPROGRAM RETURN)

O65 (SUBPROGRAM OF O100)
G01 Z0. F70.
X1.1222 Y[#65+-.36 Z-.0022
X.8112 Z-.0571
Y[#65+-.61 Z-.1011
X.567 Z-.1442
X.5345 Y[#65+-.6114] Z-.1499
X.5024 Y[#65+-.6157] Z-.1557
X.4707 Y[#65+-.6227] Z-.1614
X.4397 Y[#65+-.6324] Z-.1671
X.4097 Y[#65+-.6449] Z-.1728
X.381 Y[#65+-.6598] Z-.1785
X.3536 Y[#65+-.6773] Z-.1843
X.3278 Y[#65+-.697] Z-.19
X.3039 Y[#65+-.719] Z-.1957
X.282 Y[#65+-.7429] Z-.2014
X.2622 Y[#65+-.7686] Z-.2072
X.2448 Y[#65+-.796] Z-.2129
X.1227 Y[#65+-1.0076] Z-.256
X.1765 Y[#65+-.9995] Z-.2656
X.2299 Y[#65+-.9886] Z-.2752
X.2826 Y[#65+-.9749] Z-.2848
X.3345 Y[#65+-.9583] Z-.2944
X.3854 Y[#65+-.939] Z-.304
X.4352 Y[#65+-.917] Z-.3136
X.4837 Y[#65+-.8923] Z-.3232
X.5309 Y[#65+-.8651] Z-.3328
X.5765 Y[#65+-.8354] Z-.3424
X.6205 Y[#65+-.8032] Z-.352
X.6627 Y[#65+-.7688] Z-.3616
X.703 Y[#65+-.7321] Z-.3712
X.7412 Y[#65+-.6934] Z-.3808
X.7774 Y[#65+-.6526] Z-.3904
X.8112 Y[#65+-.61] Z-.4
G02 X.1227 Y[#65+-1.0076] I-.8112 J.61
G01 X.2448 Y[#65+-.796]
G02 X.567 Y[#65+-.61] I.3222 J-.186
G01 X.8112
Y[#65+-.36]
X1.1222
G02 X1.183 Y[#65+-.448] I0. J-.065
X-.2035 Y[#65+-1.2485] I-1.183 J.448
X-.2493 Y[#65+-1.1519] I.0105 J.0642
G01 X.0283 Y[#65+-.671]
G02 X.567 Y[#65+-.36] I.5387 J-.311
G01 X.8112
G00 Z.1
X.3379 Y[#65+-.9571]
Z-.3
G01 Z-.4 F70.
X.3884 Y[#65+-.9377] Z-.4096
X.4379 Y[#65+-.9157] Z-.4191
X.4861 Y[#65+-.891] Z-.4286
X.5329 Y[#65+-.8639] Z-.4382
X.5782 Y[#65+-.8342] Z-.4477
X.6218 Y[#65+-.8022] Z-.4573
X.6637 Y[#65+-.7679] Z-.4668
X.7037 Y[#65+-.7315] Z-.4764
X.7417 Y[#65+-.6929] Z-.4859
X.7776 Y[#65+-.6524] Z-.4955
X.8112 Y[#65+-.61] Z-.505
G02 X.1227 Y[#65+-1.0076] I-.8112 J.61
G01 X.2448 Y[#65+-.796]
G02 X.567 Y[#65+-.61] I.3222 J-.186
G01 X.8112
Y[#65+-.36]
X1.1222
G02 X1.183 Y[#65+-.448] I0. J-.065
X-.2035 Y[#65+-1.2485] I-1.183 J.448
X-.2493 Y[#65+-1.1519] I.0105 J.0642
G01 X.0283 Y[#65+-.671]
G02 X.567 Y[#65+-.36] I.5387 J-.311
G01 X.8112
G00 Z.1
#65=[#65+5.]
M99 ( SUBPROGRAM RETURN)

O100 (SUBPROGRAM OF O100)
G01 Z-.19 F70.
G03 X-.3027 Y[#100+-2.1538] I.3027 J-2.1538
G00 Z.1
Y[#100+2.1538]
Z-.09
G01 Z-.38 F70.
G03 X-.3027 Y[#100+-2.1538] I.3027 J-2.1538
G00 Z.1
Y[#100+2.1538]
Z-.28
G01 Z-.57 F70.
G03 X-.3027 Y[#100+-2.1538] I.3027 J-2.1538
G00 Z.1
Y[#100+2.1538]
Z-.47
G01 Z-.76 F70.
G03 X-.3027 Y[#100+-2.1538] I.3027 J-2.1538
#100=[#100+5.]
M99 ( SUBPROGRAM RETURN)

O105 (SUBPROGRAM OF O100)
G01 Z-.19 F70.
G03 X.3027 Y[#105+2.1538] I-.3027 J2.1538
G00 Z.1
Y[#105+-2.1538]
Z-.09
G01 Z-.38 F70.
G03 X.3027 Y[#105+2.1538] I-.3027 J2.1538
G00 Z.1
Y[#105+-2.1538]
Z-.28
G01 Z-.57 F70.
G03 X.3027 Y[#105+2.1538] I-.3027 J2.1538
G00 Z.1
Y[#105+-2.1538]
Z-.47
G01 Z-.76 F70.
G03 X.3027 Y[#105+2.1538] I-.3027 J2.1538
#105=[#105+5.]
M99 ( SUBPROGRAM RETURN)

O110 (SUBPROGRAM OF O100)
G01 Z-.76 F70.
G03 X-.2957 Y[#110+-2.1043] I.2957 J-2.1043
#110=[#110+5.]
M99 ( SUBPROGRAM RETURN)

O115 (SUBPROGRAM OF O100)
G01 Z-.76 F70.
G03 X.2957 Y[#115+2.1043] I-.2957 J2.1043
#115=[#115+5.]
M99 ( SUBPROGRAM RETURN)

O120 (SUBPROGRAM OF O100)
G01 Z-.3 F70.
G03 X-.2957 Y[#120+2.1043] I-.2957 J-2.1043
G00 Z.1
X.2957
Z-.2
G01 Z-.6 F70.
G03 X-.2957 Y[#120+2.1043] I-.2957 J-2.1043
#120=[#120+5.]
M99 ( SUBPROGRAM RETURN)

O125 (SUBPROGRAM OF O100)
G01 Z-.3 F70.
G03 X.2957 Y[#125+-2.1043] I.2957 J2.1043
G00 Z.1
X-.2957
Z-.2
G01 Z-.6 F70.
G03 X.2957 Y[#125+-2.1043] I.2957 J2.1043
#125=[#125+5.]
M99 ( SUBPROGRAM RETURN)


( END OF PROGRAM)

N346 M30
%

16
General Mach Discussion / Re: lost when it comes to nesting
« on: April 28, 2009, 11:02:20 PM »
Ok so I think I am getting there, but I can't get variables to work in the code when I use G17 G03...
%
O00100 ( PROGRAM NUMBER)

( PROGRAM NAME - testing_NEST.TAP)
( DATE - TUE. 04/28/2009)
( TIME - 12:05PM)

N01 G20 G40 G49 G54 G80 G90 G91.1
N02 G53 Z2. F80

#5=0.
M98 P10 L3
M30

O10 (SUB)
   G01 Z-.125 F80
   G17 G02 X1.9375 Y[#5.] I-1.9375 J0. F 70
   #5=[#5+2.]
M99 ( SUBPROGRAM RETURN)

Thanks
Ben

17
General Mach Discussion / Re: lost when it comes to nesting
« on: April 28, 2009, 03:09:10 PM »
Awesome thanks! I didn't know that we could use formulas like that in g-code. It reminds me of Pascal. Now I have something to play with.

Thanks again!

Ben

18
General Mach Discussion / lost when it comes to nesting
« on: April 28, 2009, 12:30:20 PM »
So I am trying to figure out how to nest. I just want to replicate circles in my y axis, lets say 5 times. I have broken out a text book and read some posts here, but I can't get anything to work. I tried adding L5 in the M98 line to repeat the subprogram but I don't know how to have the subprogram jump a few inches each time it is run. I guess I am supposed to add a Y 5. to add 5 inches each time, but I don't really have a clue.
Thanks
Ben

%
O00100 ( PROGRAM NUMBER)


( PROGRAM NAME - testing_test.TAP)
( DATE - TUE. 04/28/2009)
( TIME - 12:05PM)

N01 G20 G40 G49 G54 G80 G90 G91.1
N02 G53 Z2. F80

( FIRST CUT - FIRST TOOL)

N03 T1
N04 G00 G90 G54 X1. Y0. M05
N05 G43 H1 Z.1 M08
N06 M98 P10 ( SUBPROGRAM CALL)
N07 G00 Z.1
N08 M09
N09 M05
N10 G53 Z2.
N11 G53 X0. Y0.
N12 M02


O10 (SUBPROGRAM OF O100)
G01 Z-.5 F70.
G17 G03 X1. Y0. I-1. J0.
M99 ( SUBPROGRAM RETURN)


( END OF PROGRAM)

N13 M30
%

19
So what kind of accel. would be ideal? I should go check on my machine, but I'm not at home right now. Also I am using BobCad(it's ok) which creates my g-code for me and it is supposed to slow down in my arcs. It seems that if I program it for 100ipm, things work out pretty well. once i increase the percentage feed rate on Mach3, it starts to lose the 'crispness'. (I guess it is just my learning curve)

Thanks
Ben

20
I built my machine and it is working great, but I am just always trying to improve it.
Should all of my motors/axis use the same accel. and vel. or will Mach3 compensate for the differences?

It seems when I increase the percent function on the mach screen, my corners start to round... ???

Thanks
Ben

Pages: « 1 2 3 »