Hello Guest it is December 08, 2019, 05:29:23 AM

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - gtoguy

Pages: 1 2 3 »
1
Flash Screens / Re: Tormach Flash Screen Set
« on: April 17, 2010, 10:42:17 AM »
I believe you need to install the latest flash utility

2
Flash Screens / Re: Tormach Flash Screen Set - editing
« on: December 25, 2009, 02:29:34 PM »
 I agree they are very cool. 

Can someone tell me how to edit the flash screens (.swf file) such as those that Tormach uses. I used to be able to edit the .set files as I wished to add convenient controls and labels with MachScreen editor.I would like to edit the flash screen to add some convenient things left out such as the name of the coordinate system i.e."I named the G55 user system to "Left Rear Vise corner".

3
Ron,.....I just sent a response to ypur personal message.  I am not as familiar with the forum workings as I should be so it took me a while to realize I had a personal message to respond to.....Pat


4
sounds good Ron.  I am not familiar with command "Set pathstring = fso.GetFolder(".")  " so I am not much help.

In the mean time, I wil modify the screen as I didin the prior version so I can select from my tool table.  I find this ability very useful.

Thanks again for the wizard package....its a great time saver for basic machining.

5
Ron,
I am gettin an error message rather than the "unknown". I have the PCNC software installed in the path "C:\PCNC3\".  I also have the Mach 3 software installed in "C:\Mach3\", however, I am running the wizard from the PCNC3 software.  I looked at your code and I can't explain why it is not working either.  Is there a tool to allow de-bugging realtime to watch the variables during the code execution like I can do in more typical VB programming for PC aplications?

Pat

6
Ron,

I am using the latest zipped version file I could find called "Newfangled282.zip"

Here is the code I have been using that I added to your screen in a prior version (v2.77) to pull up the tool diameters and descriptions.  It works perfectly.  You may be correct that ToolDesc doesn't work so I use a DRO that pulls up the Tool Description bases on the tool number like Tormach does in their screens. (check out the program line...."SetOemDRO(824,ToolNumber (Dlg1.listbox))    'set minimized Tool#DRO so that TOOLDESC DRO will Update")

Sub main
' read tool info from tool table and update DROs for tool number and dia

Dim ToolNumber (256) As Single
'''''Dim ToolDesc (20) as string
Dim ToolDia (256) As Double
Dim ToolDisplay(256) As String
CurrentTool = 1
ToolCnt=0

For CurrentTool=1 To 255
 
  ''''''ToolDesc (CurrentTool) =
  TempDia = GetToolParam(CurrentTool , 1)
If TempDia>0 Then
   
  ToolNumber (ToolCnt) = CurrentTool
  ToolDia (ToolCnt)= TempDia
  ToolDisplay(ToolCnt) = Format(ToolNumber (ToolCnt),"000")  & "  ("  & Format(ToolDia (ToolCnt),"0.0000") &""")"
  ToolCnt=ToolCnt+1
 End If
 
Next CurrentTool


Begin Dialog ToolBox 256,89, "Select Tool from Tool Table"
  OKButton 204,24,40,14
  CancelButton 204,44,40,14
  ListBox 50,24,128,60, ToolDisplay (),  .listbox
  Text 50,17,128,10,"Tool # (Tool Dia) "
End Dialog



Dim Dlg1 As ToolBox
Button = Dialog (Dlg1)

If Button=0 Then  'cancel button
  Exit Sub
End If
   
   
SetUserDRO(1007, ToolNumber (Dlg1.listbox))
'''''''SetUserLabel (1,ToolDesc(count))
SetUserDRO(1004, ToolDia (Dlg1.listbox))
SetOemDRO(824,ToolNumber (Dlg1.listbox))    'set minimized Tool#DRO so that TOOLDESC DRO will Update
   
End Sub

main

7
Ron....I am a Tormach user with the latest software and get an error when I try to pull the tool info from the table.  It does not recognize the "get tool desc" on line 30.

You may remember me, I am the guy who worked with you on the ability to pull the information from the tool table many months ago.

Any idea what's happening?

Pat

8
Bargain Basement / Re: Machining Cameras
« on: January 27, 2008, 10:45:26 PM »
Arnie,

I built the camera attachment today from your article in the Digital Machinist magazine. Good article.  It works very well.  I am seeing some quirky behavour of the the IC435C driver and the webcam software, but I can deal with it.  Ihave played with the camera in XP Professional and Mach3 and CentreCam and also on an XP machine with the CentreCam software.  The driver locks up and quits working so I restart the application to get it going again.

What are the "con", "dis", and "R/S" buttons for in the CentreCam software.  There is no help screen or documentation for the software.  I am using a version of Mach3 but it is the PCNC3 version that came with my PCNC1100 mill and the video plug in is not part of their implementation of Mach3.

Pat


9
Art,

Can you provide upgrade information/dates for us?  I am using PCNC version 3

Thanks,
Pat

10
Newfangled Solutions Mach3 Wizards / Re: V2.76
« on: January 20, 2008, 04:39:22 PM »
Ron,

The GetToolDesc code errors on my system.  Do you suppose it is because this is a new code Art has added and I am using the PCNC Mach 3 version which has not been updated for a while?

Pat

Pages: 1 2 3 »