Messages

3781

VB and the development of wizards / Re: How to attach VB script to button

« on: September 13, 2007, 06:10:26 PM »

Nope, my version doesn't work.  I will try to play with it later if someone else doesn't get you sorted soon.

Brett

3782

General Mach Discussion / Re: Mach 3 Charge Pump & Screen Problems

« on: September 13, 2007, 05:34:35 PM »

Ok, if I leave the charge pump set to 5khz it seems to work fine. Does this sound correct?

Doesn't sound right to me, but as long as it works.

Brett

3783

VB and the development of wizards / Re: How to attach VB script to button

« on: September 13, 2007, 05:26:34 PM »

Enable 1 LED is OEM code 846. Place and led on your screen and assign it oem code 846

Get OEMLed (846)
 If OemLed(846,1) Then
  DeActivateSignal(Enable1)
Else
   ActivateSignal(Enable1)
EndIf

Tyr this, I'm no VB guru so be careful. I havent had time to try it.

 

3784

General Mach Discussion / Re: Prox sensors - will these work with mach setup

« on: September 13, 2007, 03:59:35 PM »

I don't see why they won't work Graham. Says you can wire them for No or NC. Also says they can be either NPN or PNP. Looks like for normally closed you will run the black lead to + and the white to ground.

Brett

3785

Others / Re: Extra turn wizards

« on: September 13, 2007, 03:04:33 PM »

Thanks for shareing. 

Brett

3786

VB and the development of wizards / Re: How to attach VB script to button

« on: September 13, 2007, 03:01:39 PM »

In screen 4 you click on the button. You can choose system function, oem code, g code, or VB script function edited in Mach 3, Choose the VB script function. Once you have mach open with the edited screen, look at the top tabs, operator, edit button script. The button you added should now be blinking with the others that are VB buttons. Click on it and insert your code, close and save. That should do it.

Brett

3787

General Mach Discussion / Re: Prox sensors - will these work with mach setup

« on: September 13, 2007, 02:54:43 PM »

Hey Graham, I clicked on the link and got an error page.

Brett

3788

Tangent Corner / Re: Hood has a big beaver.

« on: September 13, 2007, 08:57:30 AM »

 


Brett

3789

General Mach Discussion / Re: Mach 3 Charge Pump & Screen Problems

« on: September 13, 2007, 07:00:47 AM »

You may want to talk to Mr. Duncan at CNC4PC about the charge pump. He is good to work with.

On the screen sizing, in Config, General config, do you have the auto screen enlarge check box checked?

Brett 

3790

General Mach Discussion / Re: Mach 3/winxp system crash

« on: September 12, 2007, 06:42:17 PM »

Wireless networks can cause this too.


Brett