Messages

3701

Tangent Corner / Re: Which Plasma Torch

« on: October 07, 2007, 09:47:52 PM »

 

Brett

3702

General Mach Discussion / Re: Serial/Modbus-servo comunication.

« on: October 07, 2007, 09:37:18 PM »

Hey Dan, have a look at this link, I hope it helps.

http://www.rogersmachine.net/encoderinterface.html

Brett

3703

General Mach Discussion / Re: MDI Screen

« on: October 07, 2007, 09:21:37 PM »

What inputs? Can you give more detail? If it is the spindle, is it the dwell that makes it seem like it's not working?

Brett

3704

Mach3 and G-Rex / Re: Mach3 + G100 + other Plc devices

« on: October 07, 2007, 09:15:11 PM »

Hey guys, I want to keep up with this topic. Using a PLC with Mach should be no trouble. Mach, PLC, and a G100? Good question.

Brett

3705

Show"N"Tell ( Your Machines) / Re: Another Mad Project!

« on: October 07, 2007, 09:11:44 PM »

Good job fdos. Any plans for cublocs on these machines?

Brett

3706

VB and the development of wizards / Re: Dosen't see change

« on: October 07, 2007, 09:03:09 PM »

Hey Ben, I don't think you will be able to do this. Obvioulsy you can get and update the values, but it is a setting, kinda like motor tuning, it isn't meant to be changed on the fly. Seems like I saw a post from you about the config. changing often. I think you may want to look at having specific profiles set up. Sorry if I'm misunderstanding you.

Brett

3707

Show"N"Tell ( What you have made with your CNC machine.) / Re: Test piece for an X3 mill

« on: October 07, 2007, 08:36:00 PM »

Good job John. I hope you will keep the pics coming of the whole project. You got any more pics for now?

Brett

3708

LazyCam (Beta) / Re: File in 3 d

« on: October 05, 2007, 10:13:22 PM »

Seems like I remember someone saying hold shift and a mouse button or something along those lines, not certain though.

Brett

3709

General Mach Discussion / Re: Mach 3 issue with very large (22 meg) g-code

« on: October 05, 2007, 06:25:31 PM »

Just remember what options you have checked in config, toolpath and uncheck all of them.

Brett

3710

General Mach Discussion / Re: Mach 3 issue with very large (22 meg) g-code

« on: October 05, 2007, 06:00:28 PM »

Have you tried to turn off some of the toolpath screen features and see if it helps?

Brett