2531
General Mach Discussion / Re: Homing Problem
« on: January 06, 2009, 04:27:29 PM »
http://www.machsupport.com/docs/Mach3Mill_Install_Config.pdf
Page 91 may help
Home Slave with Master Axis, if checked, homes both motors of a master/slave pair at the same time.
This will not do axis straightening, however.
Page 95
Brett
Page 91 may help
Home Slave with Master Axis, if checked, homes both motors of a master/slave pair at the same time.
This will not do axis straightening, however.
Page 95
Brett