111
Mach4 General Discussion / Re: Please help me make the touch-off feature work.
« on: July 19, 2019, 09:59:34 AM »
As long as you have the probe input setup correctly it should just work. Set the THC mode to manual, set up all the thc settings (cut start settings are used with M3 weather using a THC or not) and when you execute a M3 (as long as you don't have touch off disabled) it should do its thing.
As for the sheetCAM stuff and post processor, I have no idea. The first thing you need to do is learn how to read and write Gcode manually if you don't know already. You are responsible for any Gcode you produce (manually or using CAM). The post processor is what determines the Gcode it will spit out. Only you will know if the Gcode it produces is right for you. If it isn't you will need to use a different post processor, edit one of your own or do something different in SheetCam.
As for the sheetCAM stuff and post processor, I have no idea. The first thing you need to do is learn how to read and write Gcode manually if you don't know already. You are responsible for any Gcode you produce (manually or using CAM). The post processor is what determines the Gcode it will spit out. Only you will know if the Gcode it produces is right for you. If it isn't you will need to use a different post processor, edit one of your own or do something different in SheetCam.